Description:
The FSM-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30” drop testThe FSM-60S splices a fiber in 9 seconds and heats a 60mm splice sleeve in 30 seconds, for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fiber holder system), automated monitor image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on.New software included provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.
Specification:
Applicable type of fibers
|
SM (ITU-T G.652)
MM (ITU-T G.651 DS (ITU-T G.653) NZDS (ITU-T G.655) |
Fiber Count
|
Single
|
Applicable fiber dimensions
|
Cladding Diameter: 80 to 150µm.
Coating diameter: 100 to 1000µm |
Fiber setting and cleaved length
|
Sheathe clamp A (standard): For coating dia. up to 250µm (8 to 16mm cleave), coating dia. of over 250µm (16µm cleave)
Sheathe clamp B (option): For coating dia. up to 1000µm (8 to 16mm cleave) Sheathe clamp C (option): For 900µm dia. loose tube fiber (8 to 16mm cleave) Fiber holder (option): FH-60-250 and FH-60-900 (10mm cleave) |
Splicing modes
|
Total 100 modes
|
Typical splice loss
|
0.02dB with SM
0.01dB with MM 0.04dB with DS 0.04dB with NZDS (Measured by cut-back method relevant to ITU-T standard) |
Return loss
|
>>60dB
|
Splicing time
|
Typical 9 sec. with SM FAST
10 sec. with SM AUTO 13 sec. with AUTO modes with standard SM (ITU-T G.652) |
Arc Calibration Method
|
Automatic
Real-time and by using results of previous splice when in AUTO mode Manual arc calibration function available |
Splice Loss Estimate
|
Available
|
Attenuation splice function
|
Intentional high splice loss of 0.1dB to 15dB (0.1dB step) can be made for an in-line fixed attenuator
|
Tube heater / heating time
|
Built-in tube heater with 30 heating modes / Typical 30 sec. with Fujikura FP-03
|
Applicable protection sleeve
|
60mm 40mm and Fujikura FPS01 series
|
Storage of splice result
|
the last 2000 results to be stored in the internal memory
|
Tension test
|
1.96 to 2.25N
|
Operating condition
|
0 to 5,000m above seal level, 0 to 95%RH and -10 to 50ºC and up to 15m/s wind velocity, respectively
|
Storage Condition
|
0 to 95%RH and -40 to 80ºC respectively. Battery: -20 to 30º for long term
|
Dimensions
|
136Wx161Dx143H (mm) excluding rubber foot
|
Weight
|
2.3kg with AC adaptor ADC-13
2.7kg with battery BTR-08 |
Viewing method and display
|
Two CMOS cameras and 4.1" color LCD monitor
|
Fiber view and magnification
|
X/Y (300X magnification), or both X and Y simultaneously (187X magnification)
|
Power Supply
|
Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13. 13.2V DC with BTR-08
|
No. of splice cycles with battery
|
Typical 160 cycles (splice / tube heat) with BTR-08
|
Electrode Life
|
2500 arc-discharges
|
Terminals
|
USB 1.1 (Mini-B type) connector for PC communication.
6-pin Mini-DIN connector for HJS-02, HJS-03 or SH-8C power supply |
FSM-60S Fusion Splicer Kit Includes (with cleaver):
★CT30A Cleaver
★ADC-13 AC Adapter
★ACC-14 AC Cord
★Spare Electrodes (pair)
★Sheath Clamp
★USB Cable
★Splicer Carrying Strap
★Quick Reference Guide
★Video Instruction Manual
★JP-05 Splice Sleeve Cooling Tray
★Transit Case with Carrying Strap