Product instruction:
1: Heating system: TN350C adopts high effective nickel-chromium heating tube. Advanced technology and Long life. The hot-air circle system which design by Torch, it warm up quickly and make PCB component be heated totally.
2: Protection system: It adopts a SSR solid relay of big current and high pressure resistant to non-contact output. Safety and reliably. It can monitor the change of temperature and heat number in furnace chamber with the functions fuzzy control and data collection. Then control the heating component with the least pulse and response quickly. TO keeps the Temperature control accuracy, but the equipment can not be damage for the high current and high voltage. And each room fits a safety pipe which is high temperature and high pressure resistant function so that the whole system can run safely and calmly.
3: Accuracy control by IPC and PID intelligent arithmetic. According to the PID intelligent calculation, heat output can be controlled accurately and response to the change of outside to balance the temperature. The whole system has a modularized design. It is convenient to maintenance and disassembles
4: Outer shell and furnace body of TN350C can be opened wholly and automatically. It is convenient to clean and maintain it.
Main features:
A: Intuitional welding control: TN350C adopts advanced furnace temperature collection system. It can test temperature curve and temperature in furnace hearth. The temperature curve can be recorded or printed at the same time.
B: Smooth and safe transmission system: Drive system adopts a high quality conversion motor and conversion system .It also has a closed-loop governor and Turbine speed reducing box of 1:100 to keep running smoothly .Speed:0－1600mm/min.
C: Stable and safe electric control system: Delay switch protection. After power off, temperature drops evenly so that can prevent damage to transmission component and heater.
D: Power-off protection: To keep PCB output normal. Windows operating platform has a strong functions and high stability.
Technical instruction:
A.Temperature control segment: 10
B.Temperature-zone numbers: upper 5/ lower 5 ,Cooling house 1up/1 below
C.Temperature control system: automatic temperature control with PID intelligence microcomputer. SSR non-contact output
D.Temperature control accuracy: ±2℃
E.Warm-up time < 30min
F.Temperature range: Room-temperature -360℃
G.Heating supply: full hot-air micro-circular convection
F:Automatic relay heating system:When start the equipment, it can protect the controller and motor against instantaneous current and voltage and protect component when it is welding.
I.Transmission belt :Stainless steel netting
J.belt/belt width: 300mm
K.Belt ?speed: 0-1600mm/min free adjusting
I:Warning system :automatic warning with pilot light or sound when temperature is over.
M.Cooling system: Tow groups transverse flow vortex centrifuge blower
N.Power supply: three phase four wires, 380V
O.Max power:22KW.Normal work power: 10KW
R.Weight: 600 kg
S.Dimension: Length ×width ×height (2500×900×1390mm)
1: Heating system: TN350C adopts high effective nickel-chromium heating tube. Advanced technology and Long life. The hot-air circle system which design by Torch, it warm up quickly and make PCB component be heated totally.
2: Protection system: It adopts a SSR solid relay of big current and high pressure resistant to non-contact output. Safety and reliably. It can monitor the change of temperature and heat number in furnace chamber with the functions fuzzy control and data collection. Then control the heating component with the least pulse and response quickly. TO keeps the Temperature control accuracy, but the equipment can not be damage for the high current and high voltage. And each room fits a safety pipe which is high temperature and high pressure resistant function so that the whole system can run safely and calmly.
3: Accuracy control by IPC and PID intelligent arithmetic. According to the PID intelligent calculation, heat output can be controlled accurately and response to the change of outside to balance the temperature. The whole system has a modularized design. It is convenient to maintenance and disassembles
4: Outer shell and furnace body of TN350C can be opened wholly and automatically. It is convenient to clean and maintain it.
Main features:
A: Intuitional welding control: TN350C adopts advanced furnace temperature collection system. It can test temperature curve and temperature in furnace hearth. The temperature curve can be recorded or printed at the same time.
B: Smooth and safe transmission system: Drive system adopts a high quality conversion motor and conversion system .It also has a closed-loop governor and Turbine speed reducing box of 1:100 to keep running smoothly .Speed:0－1600mm/min.
C: Stable and safe electric control system: Delay switch protection. After power off, temperature drops evenly so that can prevent damage to transmission component and heater.
D: Power-off protection: To keep PCB output normal. Windows operating platform has a strong functions and high stability.
Technical instruction:
A.Temperature control segment: 10
B.Temperature-zone numbers: upper 5/ lower 5 ,Cooling house 1up/1 below
C.Temperature control system: automatic temperature control with PID intelligence microcomputer. SSR non-contact output
D.Temperature control accuracy: ±2℃
E.Warm-up time < 30min
F.Temperature range: Room-temperature -360℃
G.Heating supply: full hot-air micro-circular convection
F:Automatic relay heating system:When start the equipment, it can protect the controller and motor against instantaneous current and voltage and protect component when it is welding.
I.Transmission belt :Stainless steel netting
J.belt/belt width: 300mm
K.Belt ?speed: 0-1600mm/min free adjusting
I:Warning system :automatic warning with pilot light or sound when temperature is over.
M.Cooling system: Tow groups transverse flow vortex centrifuge blower
N.Power supply: three phase four wires, 380V
O.Max power:22KW.Normal work power: 10KW
R.Weight: 600 kg
S.Dimension: Length ×width ×height (2500×900×1390mm)