(1)Introduction

SMH series hydraulic cone crusher get to world advanced level, is designed and made through absorbing world crushing technology. it is widely use in metallurgical,architectural,water and electricity,traffic,chemical,architectural material industries, it is suitable for crushing varies of mid hard and above mid hard ores and rocks.

 

(2)Technical Character

1 Reasonable construction advanced crushing principle and technical specification, reliable work and low cost.

2 Strong crushing ability, high efficiency productivity, high capacity.

3  Hydraulic system is reliable provide safe overload protection.

4  Types of crushing chamber are for wide range of product size requirement.

5 Use hydraulic adjustment and hydraulic clean chamber setting, much increase automation.

 

(3)Technology Data

Model	Max Feed Size (mm)	Discharge Range  (mm)	Power (kw)	capacity(t/h) --  open circuit, closed discharge(mm)												Weight (t)	Dimensions (LxWxH) (mm)
				9	13	16	19	22	26	32	38	51	63	76	89
SMH120C	160	22-32	75-90					120	130	150						12.5	2061×1740×2114
SMH120M	130	13-26			65	85	100	120	130
SMH120F	50	9-19		40	60	80	90
SMH180C	180	22-32	132-160					185	195	215						13.5	2061×1740×2073
SMH180M	140	13-32			90	115	135	160	180	200
SMH180F	60	9-22		60	80	100	120	140
SMH250C	260	26-51	160-220						250	290	340	395				24.2	2695×2258×2712
SMH250M	150	16-38				125	140	165		275	330
SMH250F	80	9-22		70	90	115	130	150
SMH350EC	315	38-64	250-280								555	649	766			45.85	4275×3620×3346
SMH350C	230	26-64							366	430	468	629	657
SMH350M	205	22-52						266	299	348	393	451
SMH350F	180	16-38				188	212	234	267	305	337
SMH550EC	450	38-89	400								890	1179	1380	1475	1566	86.7	4828×3721×4310
SMH550C	350	31-76								800	850	1100	1288	1398
SMH550M	320	25-63							612	735	815	990	1137
SMH550F	268	19-52					376	412	500	620	725	867

Note: The capacity is total tons per hour passing through crusher at open circuit when crushing mid-hard material and bulk density with 1.6×10³Kg/m³ capacities are relative to physical character and type of feeding, feeding size and composition and so on.

 

(4)Enhance Crusher Capacity and Character

The capacity charts is for properly using SMH cone crusher and get to its capacity. Crusher is  component of mining production line, so it’s character result from feeder, conveyor, screen, electric motor, drive part, surge bin. Noticing follow factors can enhance crusher capacity and character.

1 According on crushing material to select chamber

2 Feed rate is controlled.

3 Feed is average distribute at 360° crushing chamber.

4 Automation controls

5 Enough crusher discharge area.

6 Capacity of discharge conveyor is more than cone crusher

7 Use right scalping and closed circuit screens

 

(5)Below factors will lower the capacity

1 Fine material of feeding is more than 10% of capacity

2 Containing sticky material in feed

3 Lack of feed control

4 Feed is not averagely distributed around crushing chamber

5 Horsepower is not getting too recommended

6 Discharge area, discharge conveyor, scalper and screen are not sufficient

7 Insufficient crusher discharge area

8 Feed material is too hard or too tough

 

(6)The Specifications We Should Know for Quoting

1 What is the raw material /processing stone?

2 The max input size?

3 Output size?

4 Output capacity?