Single Stage Crusher
Single Stage Crusher is used to crush the medium hardness ore materials ,such as limestone, gypsum ,coal etc ,as well as the mixture materials of limestone and .It is widely used in highway, construction, chemical , coal etc industries .
Working Principle:
After entering the crushing cavity ,the materials are piled up on the bracket .The hammer is moving in the bracket gap ,which continuously hit the materials .The falling parts will be hit and crushed again by the high-speed rotating hammer .And then the qualified parts can be discharged through camber plate .
a. large crushing ratio. Can make the big scale materials to the demanding granularity one time .
b. Comparing with the traditional two-stage crusher ,it can save investment 60%,ore crushing cost lowing down 45%.
c. Easy operation ,convenient maintenance ,low labor intensity.
Technology Parameters

Model	Max Feed Size (mm )	Rotor diameter (mm )	Rotor length (mm)	Granularity≤15%	Capacity (t/h )	Motor power (kW )	Weight 　　(not including the motor) 　　(t)
PCF-1412	600*600*900	1420	1200	≤25	80-130	130-190	23.5
PCF-1616	800*800*1000	1650	1630	≤25	130-240	250-350	43.3
PCF-1817	900*900*1200	1850	1730	≤25	240-350	400-560	70
PCF-2018 PCF-2018(1)	<1m31000*1000*1000	2020	1802	≤25	350-450	630-710	89
PCF-2022	1000*1000*1500	2010	2230	≤25	400-600	630-800	111
PCF-2022(1)	1000*1000*1500	2010	2230	≤75	700-800	800	130
PCF-1618	≤1000	1650	1830	≤25	240-280	400	49.5
PCF-1818	750*750*800	1850	1830	≤25	300-350	560	70
2PCF-1818	1000*1200*1500	1850	1830	≤75	1000	560-710	119
2PCF-2022	1000*1000*1500	2020	2230	≤25	700-900	800*2	142