(1)Pegson Crusher Parts Crusher Hammers introduction
BIG GOLE TEETH® crusher hammers is a highly wear-resistant parts. DSMAC manufactures this type of crusher hammers with external refining and pressure casting technologies. Molten steel is purer and the matrix is more compact. Our crusher hamemrs have a service life longer than those made of common high manganese steel and is safer to use.
(2)Pegson Crusher Parts Crusher Hammers Feature
1. Crusher hammers casted the Tungsten Titanium alloy in the high-manganese steel substrate,It may resist the severe grinding abrasion.
2. Crusher hammers service life has been enhanced by 50% compared to the ordinary high-manganese steel!
3.compared to the similar products, “big gold tooth” crusher hammers have the advantage strong wear resistance and low price.
(3)Pegson Crusher Parts Crusher Hammers Application
1.DSMAC manufactures this type of “big gold tooth”Crusher Hammers with external refining and pressure casting technologies.
2.Crusher hammers aim at the crushing of limestone with abnormal content of SiO2.
3.crusher Hammers can be used in hard condition of serious abrasion.
Our Dingsheng Group CEO Mr. Lu is a Senior Engineer;
National expert;
Vice-chairman of Chinese Casting Association Wear-resisting Casting Branch;
Vice director of National casting steel and smelting technology Professional Committee;
A member of China Metallo-graphy Anti-abrasion Material Academic Board;
A standing member of China Abrasion Failure and Prevention Professional Committee;
Vice President of China Sand Stone Association and so on.
Especially, our Experts engineer Mr. Zhou Pingan who was graduate student of Tsinghua University and graduated from Tsinghua University in 1955.He is the Total Consultant of Belgium Magotteaux Wear-resistant parts in spare parts all time.
He is The Chinese mechanical engineering society wear failure and anti-wear technology professional committee reputation director and Institute of Chinese foundry advisors.
Technical Parameters
|
Model
|
Components
|
Weight(kg)
|
Substrate Hardness(HR)
|
Striking Surface Hardness(HRC)
|
Tungsten Titanium Alloy Hardness(WTiC)
|
Assembly end toughness Aku (J/cm2)
|
Big Gold Teeth/High Manganese (Lifetime)
|
|
DSCT-ZG18
|
ZGM18Cr2
|
110-115
|
180-229
|
46-48
|
68-70
|
≥80
|
≥1.5
|
|
DSCT-ZG20
|
ZGM18Cr2
|
115-120
|
180-229
|
46-48
|
68-70
|
≥80
|
≥2
|
|
DSCT-ZG22
|
ZGM18Cr2
|
120-125
|
180-229
|
46-48
|
68-70
|
≥80
|
≥2--3
|
|
DSCT-ZG26
|
ZGM18Cr2
|
125-145
|
180-229
|
46-48
|
68-70
|
≥80
|
≥2--3
|