The metal seated butterfly valves are widely used in water supply and drainage, hydre/thermal power, building project as well as industrial water system, such as steel and petrochemical.

Here is the features:
1. Structure simple is compact, stable positioning, and the weight is light.
2. Designs reasonably, the assembling and dismantling and installation is easy, to be advantageous.
3. Minimized operating torque. Lever, gear, pneumatic and electric actuators can be chosen.
3. Rubber backed seat with stable valve torque. No leakage under the rated pressure.
4. Special design, high flow rate and low flow resistance.

Detailed Description:
Series	metal seated butterfly valves
Size:	DN40-DN600/1.5”-24”
End flange:	ANSI B 16.1,ASTM B 16.47,EN 1092, AS 2129, ISO PN10/16,JIS B2212/2213, BS 10 Table D, BS 10 Table E
Face to face:	ANSI B 16.10
Top flange:	ISO 5211
Nominal pressure:	DN40-DN600(1.5”-24”) PN1.0/1.6MPa(150/200PSI) DN700-DN1200(28”-48”) PN1.0MPa(150PSI)
Body:	Cast Iron/Ductile Iron/WCB/Carbon steel/AL-Bronze/CF8,SS304/CF8M,SS316
Disc:	Ductile Iron/Ni-plated ductile iron/Nylon-plated ductile iron/AL-Bronze/Rubber lined Disc/1.2501/1.4529/CF8/CF8M/Hastelloy Alloy/Monel
Stem:	SS416/SS304/SS316/SS431/17-4PH/Monel
Seat:	NBR/Hypalon/EPDM/Neoprene/NR/Wear-Resistant EPDM/Viton/Silicon/Heat-Resistant EPDM/White EPDM/EPDM(NSF)/PTFE
Suitable temperature:	Normal Temperature -45 ~150
Medium:	Fresh water, sewage, sea water, air, vapor, food, medicine, oils, alkalis, salt etc.