1. Product Introduction:
Paraffin wax could be divided into full- refined paraffin wax, semi-refined paraffin wax and crude paraffin.
Character:
This product is white, low oil content, good stability, no odor, low polycyclic aromatic hydrocarbon content.
Performance:
It is produced by vacuum residue after propane deasphalting, furfural refining, solvent dewaxing from oil; clay added refining, and other deep-processing systems.
2. Product Specification: Fully-Refined
|
Item
|
52#
|
54#
|
56#
|
58#
|
60#
|
62#
|
64#
|
66#
|
68#
|
70#
|
Test Method
|
|
|
Melting Point
|
52-54
|
54-56
|
56-58
|
58-60
|
60-62
|
62-64
|
64-66
|
66-68
|
68-70
|
70-72
|
GB/T2539
|
|
|
Oil Content Wt%
|
0.8 max
|
GB/T3554
|
||||||||||
|
Color
(saybolt)
|
+27 min
|
+25 min
|
GB/T3555
|
|||||||||
|
Light Stability
|
4 max
|
5 max
|
SH/ T0404
|
|||||||||
|
Needle Penetration (25°C)1/10mm
|
19 max
|
17 max
|
GB/T4985
|
|||||||||
|
Kinematic Viscosity (100°C) mm2/s
|
Report
|
GB/T 265
|
||||||||||
|
Odor
|
1max
|
SH/T0414
|
||||||||||
|
Acid and Alkali with Water Solubility
|
Negative
|
SH/T 0407
|
||||||||||
|
Mechanical Impurity and Water
|
Negative
|
Observing
|
||||||||||
Semi-refined
|
Item
|
52#
|
54#
|
56#
|
58#
|
60#
|
62#
|
64#
|
66#
|
68#
|
70#
|
Test Method
|
|
|
Melting Point
|
52-54
|
54-56
|
56-58
|
58-60
|
60-62
|
62-64
|
64-66
|
66-68
|
68-70
|
70-72
|
GB/T2539
|
|
|
Oil Content Wt%
|
2.0 max
|
GB/T3554
|
||||||||||
|
Color (saybolt)
|
+18 min
|
GB/T3555
|
||||||||||
|
Light Stability
|
6 max
|
7 max
|
SH/ T0404
|
|||||||||
|
Needle Penetration (25°C)1/10mm
|
23 max
|
GB/T4985
|
||||||||||
|
Kinematic Viscosity (100°C) mm2/s
|
Report
|
GB/T 265
|
||||||||||
|
Odor
|
2max
|
SH/T0414
|
||||||||||
|
Acid and Alkali with Water Solubility
|
Negative
|
SH/T 0407
|
||||||||||
|
Mechanical Impurity and Water
|
Negative
|
Observing
|
||||||||||
3. Product Application:
1). Candle production like molding, dipping, drawing, extrusion/pressing
2). Polishes to improve buff ability, to provide solvent binding and solvent retention properties
3). Rubber and Tires as mould release agents, plasticizers and lubricants in rubber blends
4). Cosmetics and Pharmacy to act as base component in various formulations
5). Paper Coating formulations covering packaging of food and non food articles
6). Hot Melt Adhesives as cost-competitive blend component
7). Chemical Industry as processing agents, raw materials, components
4. Product Packing
5kgs solid slab, 50kgs/bag, 25MT/20’FCL for SLAB FORM; 25kgs/bag, 20MT/20' FCL without pallets, 16MT/20'FCL with pallets for GRANULE FORM
5. Storage Note:
1) Stored in a cool, well–ventilated area
2) Kept away from ignition sources, heat and flame.
3) Stored incompatibilities between oxidants and food.
It should be stored in a cool, well-ventilated area, away from fire and heat sources.