Force Capacity: 20kN, 30kN, 50kN

Load Frame Configuration: 2 column, Table-top (integrated), Electromechanical

Test Space: single zone

Typical specimens: small components, reinforced plastics, metals, wire, composites, elastomers, wood products, textiles, biomaterials, paper products, adhesives, foam, consumer products

Features

»         Complete selection of stiff, compact 2 column load frame configurations

»         High-speed, low-vibration electromechanical drives

–   World-class, maintenance-free AC servomotor and amp

–   Precision, pre-loaded ballscrews

–   Non-clutched drives, rated for full speed at maximum force

»         Linear motion guides for superior alignment

»         Versatile, easy-to-use software with standards-compliant method library (ASTM, ISO, DIN, EN, BS, and more)

»         High-resolution, digital closed loop controls (integrated into load frame)

»         Automatic limit checking of crosshead position, overload, over temperature, over voltage, etc.

»         Complete selection of grips, fixtures, environmental systems and extensometers

»         Durable test space protection

»         Fully compliant with the latest global safety directives

 

Model	ETM204C, ETM304C, ETM504C
Capacity	20kN,30kN,50kN
Calibration standard	ISO 7500, Class 1 / Class 0.5
Force range	0.2% - 100%FS / 0.4 – 100%FS
Force accuracy	±1.0% / ±0.5%
Force resolution	1/350000FS
Position accuracy	±0.50%
Position resolution	0.025μm
Crosshead speed	0.001~500mm/min
Crosshead speed accuracy	Set speed<0.01 mm/min, within ±1.0% of set speed Set speed≥0.01 mm/min, within ±0.2% of set speed
Crosshead travel	1050mm
Dimension	750mm×530mm×2250mm
Power requirements	220V±10% AC, 50/60Hz, 400W / 1kW
Weight	400kg