1. HD 720P IP Camera 18X optical zoom
2. H.264 Main Profile 4.1
3. 18x Zoom
4. Day & Night IR-cut
5. SD / 100M LAN / POE / WiFi

Specification:
________________________________________________________________________________________
Type: HD 720P IP Camera 18X optical zoom
Model Name: MG1302B / MG1302B-POE
System: Embedded Linux, ARM based 32-Bit RISC Processor, 16MB Flash ROM, 128MB DDR
Video Compression: H.264 Main Profile   Level 4.1,MJPEG
Video Resolution: SXGA(1280x1024), HD720(1280x720), D1(720x576)
Frame Rate: Up to 30fps   HD720 / D1
Image Sensor: 1/3" progressive scan CMOS sensor
Lens: 18x optical lens with auto 3A,F=4.7 to 84.6mm,F1.6 to F2.8
Minimum illumination: Day 0.2 Lux / F1.6 30IRE Or Night 0.01 Lux / F1.6 30IRE
Image Settings:
ICR (Removable IR-cut filter) for day & night vision
AEC, AWB,BLC, Brightness, Contrast, Saturation, Sharpness
Flip, Mirror
OSD Timestamp & Text caption overlay
Event Management:
Triggers: Motion detection, Digital input, Manual trigger
Actions: Digital output,Notification via Email, FTP or SD with attached video clip, snapshot
On-board Storage: SD/SDHC card slot
Network:
Interface: 10/100 Base-T ethernet
Protocols: IPv4, TCP/IP, HTTP, HTTPs, UPnP, RTSP/RTP/RTCP, IGMP, FTP, DHCP, DNS, DDNS, PPPoE, NTP, SMTP
Audio: Built-in microphone / External MIC in / Audio out
Power Supply: DC 12V/2A,Built-in PoE IEEE 802.3af compliant(Optional)
Operation Temperature: 0°C to 40°C (32°F to 104°F)
Operation Humidity: 20% to 80% RH
Dimension (L x W x H): 154mm x 79.5mm x 74mm
Net Weight: 600 grams
Connectors & Indicators:
1 x RJ45 ethernet LAN connector with 2 LED indicators
1 x Audio out, 1 x Ext.MIC.in
1 x 12V DC Jack
1 x Bicolor LED indicator for power & system status
1 x Reset button, for system reboot and restoring default
1 x DC-iris jack, power supplying for Auto/DC-iris Lens
1 x SD/SDHC card slot
1 X 8-pin terminal block for RS-485 / Digital input x 2 / Digital output / GND
Client System [OS] Requirement: Microsoft Windows 7 / Vista / XP / 2K, Browser: IE 6.x or above