Functions
|
Phase detection (normal phase, reverse phase and phase deficiency), Live wire examination, Simple Power detection, Breakpoint location and Line maintenance.
|
Power Supply
|
DC3V AA Mn batteries (R6P) ×2 PCS, Continuously working for 200 hours
|
Live Voltage Range
|
AC0~600V, 40~70Hz (Sine Wave Continuous Input)
|
Clamp Wire Size
|
Diameter ø18mm, Insulated wire available.(Equivalent to wire cross-sectional area 120mm2)
|
LED Display
|
[Positive phase]Four lights of phase detection rotate in Clockwise direction, with intermittent short beeps
[Reverse phase]Four lights of phase detection rotate in counterclockwise direction, continuous beep
[Live power] R-S and S-T lights on within voltage setting range
[Phase deficiency]R-S, S-T lights do not flash
[Open circuit]R-S, S-T lights do not flash
|
Boot Indication
|
Boot indication light turns on after booting
|
Auto Power off
|
After 3 minutes, the meter automatically cut off power supply.
|
Meter Dimension
|
Width, height, thickness 70mm×75mm×30mm
|
Clamp Lead Length
|
0.5m
|
Meter Weight
|
180g (with battery)
|
Working Temperature and Humidity
|
-10℃~55℃; below 80%rh
|
Storage Temperature and Humidity
|
-20℃~60℃; below 90%rh
|
Maximum Measured Voltage
|
AC600V
|
Dielectric Strength
|
5.4kVrms
|
Maximum rated Power
|
100mVA
|
Safety Provisions
|
EN61010-1: 2001, EN61010-031: 2002, Pollution level 2, CAT Ⅲ(600V), Transient over-voltage 6000V
|
Accessories
|
Meter: 1 Piece; Carrying case; 1 Piece.
|