Product Main

Specifications

Function
Measure AC leakage current, current, there-phase, voltage
Power
6V DC(LR6×4 alkaline dry batteries, continuously working for 12 hours)
Test Mode
Clamp CT, integral mode
Clamp Size
80mm×80mm(can clamp electric cable of 80mm diameter, or 96mm×4mm flat cable and steel earth wires)
Current Range
0.0mA~1200A
Current Resolution
0.1mA
Voltage Range
0.00V~600V
Voltage Resolution
0.01V
Measurement Accuracy
(23℃±3℃, below 70%RH,  measured wire at the center of the clamp)
0.00mA~300A: ±1.5%±3dgt 
300A~1200A:  ±2%±3dgt   
0.00V~600V:  ±1.5%±3dgt
Measured Wire Position
Measured wire at approximately the geometric center of the clamp
Data Storage
200 sets,  “FULL” symbol indicate the memory is full
RS232 Interface
With RS232 interface, download data to computer for analysis and management
Communication Wire
RS232 communication wire, 1.8m
Frequency
50Hz ,60Hz automatic identification
Gear Shift
Automatic shift
Sample Rate
About 2 times/second
Line Voltage
Below AC 600V line measurement
Display Mode
LCD: 128dots×64dots; Display area: 43mm×29mm
Meter Size
Length 275mm × Width 145mm × Height 40mm
Backlight
Controlled by LIGHT key
Data Hold
“HOLD” symbol appears
Overflow
“OL” symbol appears
Automatic Shutdown
Automatically shutdown about 15 minutes after power on to reduce battery consumption
Voltage Detection
Low battery symbol “     " appears to remind the replacement of battery when the battery voltage drops below 5.2V.
Weight
1kg(with batteries and accessories)
Working Current
50mA with enabled backlight; 25mA with disabled backlight
Working Temperature and Humidity
-10℃~40℃; 80%rh
Storage Temperature and Humidity
-10℃~60℃; below 70%rh
Insulation strength
AC 2kV/rms(between core and shell)
Safety Specifications
IEC1010-1, IEC1010-2-032, 2 class of pollution, CAT Ⅲ(600V)
Accessories
Main Unit: 1 pc; Test Line: 4 pcs (3 red, 1 black); RS232 Data Line: 1 pc; Disk: 1 pc; Battery: 4 pcs(Alkaline Dry Battery LR6); Meter Box: 1 pc; User Manual: 1 pc; Guarantee Card: 1 pc; Certification: 1 pc.