Mechanical Cleaning Filter Vessel
Automatically cleaning, filtered fluid automatically exiting.
Eliminated media disposal costs, no bag, no cartridge.
Automatic mechanically operation, reduced or eliminated operator intervention.
Pneumatic driven, no need of electric power, safe, reliable and economic.
Multi-flow rate available, accommodate a vast range of your application.
Wide applications, mainly for high viscosity, corrosive liquid, viscosity up to 1000000cp.
Typical Types,
UMCF-4
UMCF-8
UMCF-16
Mechanical Operation Principle
Raw liquid enters via the inlet and travels from the inside to the outside of the filter media, contaminants are retained on the inside, clean filtered liquid exits via the outlet. The cleaning disk travels down and then back up by the use of a pneumatic cylinder.
The flow pattern concentrates contaminants at the bottom of the filter housing and the concentrated solids are periodically purged. Purging lasts less than one second, releasing only the volume of the collection chamber and avoiding process interruptions. DF filters are ideal for continuous flow (and therefore batch) applications. In every case, these filters offer significant advantages over alternative filter designs.
UMCF Engineering Specifications
Specification / Type
|
UMCF-4
|
UMCF-8
|
UMCF-16
|
Filtration Precision
|
25um - 400um
|
25um - 400um
|
25um - 400um
|
Total Volumetric Capacity
|
3.5liters
|
14.8liters
|
41.6liters
|
Purge Chamber Capacity
|
119ml
|
0.74liters
|
6liters
|
Filtration Surface
|
722cm2
|
1703cm2
|
3935cm2
|
100um Max flow rate (m3/hr)
|
0.45-6.8m3/hour
|
2.27-13.6m3/hour
|
6.8-45.4m3/hour
|
Temperature, maximum (℃)
|
160 ℃
|
160 ℃
|
160 ℃
|
Pressure, maximum
|
21bar
|
10bar(standard)
|
10bar(standard)
|
Single Unit Weight
|
16kg
|
34kg
|
97.5kg
|
Service Height
|
1556mm
|
1760mm
|
2591mm
|
Air for Actuator Drive, min.
|
4bar@8.5 m3/hr
|
4bar@8.5 m3/hr
|
5bar@8.5 m3/hr
|
Material of Construction
|
All Wetted Parts
|
Type 304 or 316L stainless steel
|
|
Filter Element
|
|||
Standard Inlet/Outlet
|
1 1/2” BSP socket
|
2” Flange
|
3” Flange
|
Surface Finish
|
Glass bead blasted
|