his machine is specialized in deep hole drilling purpose with properties of high efficiency, high accuracy and high automation. It adopts external-chip removing method (gun drill method). Through one continues drilling, it can instead of traditional drilling, expanding and reaming procedure and arrive the machine accuracy and surface roughness requirement in one time

The machine is controlled by CNC system with function of both single action and automatic recycling. So that it can not only meet the requirements of small batch, but also can meet large batch.

The machine can drill through hole, blind hole and step hole. The machine can be widely used in the line of automobile and motorcycle, mould, military and aeronautics.

Note: Driller and accessories must be ordered separately; Coolant should be prepared by the user or bought from the manufacturer.

Features

Adopting fanuc  single spindle CNC system

Driven by A. C servo motor, transmitted by ball screw

Adopt guide-way conglutinated plastic, smooth running in low speed, without creeping

Spindle of drilling bar box is driven by gear belt, controlled by inverter motor

Spindle bearing and guide-way surface adopting automatic intermittent lubrication

High-pressure cooler is supplied by inverter motor-driving gear pump

Flat chain type automatic chip conveyor

Fully covered safe guard

Multi-monitoring device Standard accessories
→Paper filter
→Magnetic separator
→High pressure oil pump
→Tool box
→Leveling screw
※Special accessories
→Coolant chiller
→Coolant oil
→Gun drill
→Guide bush
→Rubber bush  

Specifications	zsk2104
Range of drilling diameter	8-40mm
Max. Drilling depth	600mm--2500mm
Head cabinet spindle speed	380r/min or without head cabinet
Range of drilling box spindle Speed(stepless)	300-4000r/min
Rang of feed speed  (Z-axis)(stepless)	10-150mm/min
Range of coolant pressure	1-6MPa
Range of coolant flow	6-150L/min
Rapid speed of feeding carriage	5m/min
Torque of infeeding motor	11N.m
Drilling box spindle  power	7.5kW
Head cabinet power	5.5kW
Total power of the machine	38kW(about)
Overall dimension(LxWxH)	4050x4050x2050mm(500mm) 5100x4050x2050(1000mm)