Both the split brick and split machine is The power brick is a brick split sets, director of domestic different models, from meticulously designed, Currently, China is more advanced high-speed, no noise, no damage to the brick split brick equipment.
The character of this machine:
1. It has the function of cleaver, separate brick and turning brick and so on; it expresses the packing speed and depresses the working strength.
cleaver knife adopt the high rigidity and high Mn of abrasion proof materials. It can exten1. Turn on brick organization: BWY12-17-0.75 Maximum output speed of 82 rpm.
2. Be allotted brick organization: BWY12-17-0.75 Maximum output speed of 160 rpm.
3. The belt transports organization: BWY12-17-0.75 Maximum output speed of 82rpm.
d the knife’s life for a lone time
The split brick which was send by conveyor, and then though the middle of the two knives which is reverse cut into two pieces, and then though dispartting and turning brick structure. the down piece will transport to the end directory, and then though the turning brick board into transport belt. But the up piece will be moved by the triangle belt to the front position, and then down to the same transport belt. The 12 sets little belt pulley connected with the little cylinder respective which is on the side of the disport brick structure. And it can clamp the spilt brick by the cylinder and the fixed belt pulley.
1.When the first time uses equipments , Examine that if the inner controlling a chest have a thrum to be shocked on passage in transportation relaxes first please, And, electric motor line rightness is switched in controlling a chest, after the connection had right inerrability, it will control all chest inner breakers closure.
Examine that the frequency transformer parameter is correct or not, please according to the specifications stting
Make the manual, linked switch (SB2) transferred "manual" position, to move the button to (SB5, SB6, SB7) testing the motor running direction is correct, turn to the wrong electrical re-wiring (the electrical side will arbitrarily Posts to the exchange of two lines).
Make the manual, linked switch (SB2) transferred " linked " position, move the button(SB4), then the system will start work.
When you want to the machine stopping working, please using the button of “stop (SB2)”, then it will stop.
Urgent situation, please make the button of “urgent stop” , and then the machine will stop at once.
When the machine is stopping, please close the main electrical source button(QS1).
You should make true the electrical source is closed and the inverter’s power turn-off completely, and then you can check the machine.
This is transporter in bulk or packing with many parts, and the machine should be opened by the factory technical person and then install and debugging. And then train the operator.
The basic request is low; the normal concrete masonry ground can be installed. It needs not the foundation fixing bolt, and the ground should be surface.
Before debugging, you can adjust the distance of knife and the belt, the knife enter brick depth should be 5mm, the operation part of the machine is infinitely variable regulation by inverter. According to the production, you can adjust it into the best situation.
: this machine adopt three sets wheel reduction box, the circulate circumstance of the reduction box as following:
When it is -10℃～0℃, using lubricating oil of L-CKC68, L-CKC46( it is N46,N68 before) .
When it is 0℃～40℃, using lubricating oil of L-CKC68, L-CKC220( it is N68. N100, N150, N220before) .
After one week, you should change the oil at once, and you should clear it clearly. And then, you should change the oil every 3-6months. When it is working, the oil in the reduction box should reach the fixed height. It can not be more or less. When adding the oil, you can open the air hat or the oil cup.