Q-switched ND YAG laser machine for tattoo removal and skin rejuvenation (L007)
Professional, multifunctional Q-switched ND YAG laser salon beauty equipment
Introduction of YAG laser machine:
ND: YAG Laser Cosmetic Systemintroduces gem-adjusting Q switch, which uses high energy by instant emission of laser beam to crush and remove the pigment effectively in the pathologically changed tissues. That is an explosion led by laser beam: the laser beam at the fixed wavelength enabled by the accumulated high energy can reach the pathologically changed tissues through epidermis in a very short time (only 6 ns) to instantly crush the respective color base, then the corresponding pigment group gets swollen and outburst at last due to high energy, and part of the pigment group springs out of the human body (at shallow epidermis), and the rest (at basis tissues) pigment group will become very small particle before swallowed by the human cell which will be finally discharged out of the human body through lymphatic system circulation. The pigment of the pathological tissues will fade in color till it vanishes. And the surrounding normal tissues will not be ruined since they will not absorb the laser at that fixed wavelength.
Applications of YAG laser machine:
The system gem-adjusting Q switch can effectively cure the mixed pigments by pigment precipitation of extraneous source with pathological pigment change of endogenous source, inclusive of erroneous dark eyebrow-embroidery, lip-embroidery, lip-soak, eye line-embroidery, lip-line, tattoo (inclusive of tattoo by extraneous wounds), pigment precipitation by sensitive source, freckle on female's face (male's), coffee spot, old age spot, black mole, and birthmark in black, blue, purple, brown, red and etc.
1064nm laser can penetrate into deep layer of the skin,so it is easilly absorbed by blue,black and green color pigment;therefore,it is very suitable to treat the pigment disease in the dermal layer.For example,getting rid of tattoos,eyebrow,Ota's nevus and pigmented disease.
532nm laser can penetrate into light layer of the skin;therefore,It is very easily absorbed by the brown,red and deep-brown color pigement.For example,eliminating freckles,pigment spots and other light-color tattoos.
Treatment course for different illness case as follows:
Professional, multifunctional Q-switched ND YAG laser salon beauty equipment
Introduction of YAG laser machine:
ND: YAG Laser Cosmetic Systemintroduces gem-adjusting Q switch, which uses high energy by instant emission of laser beam to crush and remove the pigment effectively in the pathologically changed tissues. That is an explosion led by laser beam: the laser beam at the fixed wavelength enabled by the accumulated high energy can reach the pathologically changed tissues through epidermis in a very short time (only 6 ns) to instantly crush the respective color base, then the corresponding pigment group gets swollen and outburst at last due to high energy, and part of the pigment group springs out of the human body (at shallow epidermis), and the rest (at basis tissues) pigment group will become very small particle before swallowed by the human cell which will be finally discharged out of the human body through lymphatic system circulation. The pigment of the pathological tissues will fade in color till it vanishes. And the surrounding normal tissues will not be ruined since they will not absorb the laser at that fixed wavelength.
Applications of YAG laser machine:
The system gem-adjusting Q switch can effectively cure the mixed pigments by pigment precipitation of extraneous source with pathological pigment change of endogenous source, inclusive of erroneous dark eyebrow-embroidery, lip-embroidery, lip-soak, eye line-embroidery, lip-line, tattoo (inclusive of tattoo by extraneous wounds), pigment precipitation by sensitive source, freckle on female's face (male's), coffee spot, old age spot, black mole, and birthmark in black, blue, purple, brown, red and etc.
1064nm laser can penetrate into deep layer of the skin,so it is easilly absorbed by blue,black and green color pigment;therefore,it is very suitable to treat the pigment disease in the dermal layer.For example,getting rid of tattoos,eyebrow,Ota's nevus and pigmented disease.
532nm laser can penetrate into light layer of the skin;therefore,It is very easily absorbed by the brown,red and deep-brown color pigement.For example,eliminating freckles,pigment spots and other light-color tattoos.
Treatment course for different illness case as follows:
|
Functions
|
Treatment course required( cure times)
|
Treatment course interval
|
|
eyebrow-embroidery
(eyeline grain) |
1 –2 times
|
30-60 days
|
|
Eyebrow-embroidery
(eyeline embroidery) |
1-3 times
|
45-60 days
|
|
Lipline (red dyed lip)
|
1-3 times
|
15-45 days
|
|
Tattoo ( caused by extraneous wounds)
|
1-4 times
|
30-60 days
|
|
Freckle, old age spot
|
1-4 times
|
15-30 days
|
|
Birthmark, nevus
|
3-7 times
|
45-90 days
|
1. Treatment for tattoo in eyebrow
Customer could not open eyes during treatment, operator should adjust energy according to depth of tattoo color, hold the handle and move it to treatment area slowly to make customer feel acceptable in mentally. Right now, the speed of flash could be set 3HZ, keep head of the handle a two-finger distance to treatment area, start treatment from head of eyebrow to end of eyebrow. It is needed to treat again in 5-10 minutes if the color of tattoo re-appear.
2. Remove eye line
The speed of flashes could be set 4-5HZ,adjust the energy of light to minimum energy, keep a one-finger distance between head of handle and treatment area. Operator should strictly protect customers’ eyes with panel for eyelid or medical pledget (panel for eyelid)of 1cm depth.
Treatment should be started from down eye line, customer should deeply close eyes and keep eyeball up-sight inside. Operator should press the pledget (panel for eyelid) with forefinger and push up eyelid, peel down eyelid with middle finger to bare the eye line, treat it with flashes of 4-5Hz. Then, treat up eye line. Also customer should close eyes and keep eyeball down-sight inside. Operator should press the pledget (panel for eyelid) with middle finger and push eyelid down, push eyelid up with forefinger to bare the eye line, treat it with flashes of 4-5Hz.
3. Remove lip line
The speed of flashes could be set 5Hz,keep a 3/4 finger distance between head of handle and treatment area. It is better to remove black, coffee, deep, red and brown lip line with 1064nm head at first time and then, treat again with 532 nm head.
Notice: All tattoos in lip should be treated in 6 months after making. OR removal treatment will fail. It should have 45-60 days interval to continue next treatment until remove all.
4. Remove tattoo
The speed of flashes could be set 3Hz/5Hz.It is better to use high energy for treatment until treatment area seeps a little blood. It should have 45-90 days interval to continue next treatment until remove all.
5. Remove spot and nevus
The speed of flashes could be set 3Hz/5Hz.Keep 3-4 fingers distance between head of handle and treatment area. It is better to use high energy for treatment until treatment area seeps a little blood. It is advised to use 1064 nm head for normal spot and nevus treatment, but for deep color spot and nevus, it is better to use 532nm head for treatment. It should have a 15-30days interval to continue next treatment until remove all.
6. Remove birthmark
The speed of flashes could be set 3Hz/5Hz.It is better to use high energy for treatment until treatment area seeps a little blood. It is advised to use 1064nm head for birthmark treatment, but for red and deep color birthmark, it is better to use 532nm head for treatment. It should have 45-90 days interval to continue.
Why our YAG laser machine better than other similar product?
1.Instantaneous blasting high laser technology, international standard of production, technical test strictly imported stone Q-switch cassette mechanism, the entire solid laser, without replacing Q-switch.
2.Pulse Energy is up to 500mj and pulse width can reach 10ns.
3.The laser gun inside is made by porcelain which is anti-high temperature and anti-corrosion. This is much better than glass, such as "Poly Compound" which will release TOXIN under high temperature. Until now, porcelain is still the best and stable material for laser gun.
4.The operation interface of whole English LCD screen, computer monitor, the temperature and pressure of the water warning system.
5.Two systems of circuit preventing wrong operation. Imported components from Europe with quality guaranteed.
Technical parameters of YAG laser machine:
Wavelength: 1064/532nm
Screen: 6.4" color-touch screen
Joint part: Adopts the most advanced (Plug-and-play) joint part
Type of laser: sapphire and ruby switch Q/KTP/YAG laser instrument
Pulse energy: 1600mJ
Instruction light: infrared ray indicator
Width of pulse: 6ns
Frequency: 1 to 6Hz
Spot diameter: 3-9mm
Cooling system: Wind + water + semiconductor
Voltage 110/220V, 5A, 50/60Hz
Packing list of YAG laser machine:
1. 1 × Main machine body
2. 1 × 532nm tip (mainly used for red, coffee and brown pigment treatment)
3. 1 × 1064nm tip (mainly used for blue, black and cyan pigment treatment)
4. 1 × Water funnel
5. 1 × Package box
6. 4 × Key (two for the machine, two for the package box)
7. 1 × Foot touch
8. 1 × Protective goggle
9. 1 × Power line (we stock 110V-240V power version and US.UK.UA.EU plugs for the country all of the world)
Payment terms
-Sample Charge: T/T or Western Union
-30% deposit before production, 70% balance before shipping
Packing and shipping
-Standard Export Carton with fully Polyfoam or Pearl Wool
-Delivery within 5 to 15 working days upon receiving payment
After-Sales-Service
-Lifetime with professional engineer support.
-Within 1 year, supply spare parts for free if the machine has quality problem.
Customer could not open eyes during treatment, operator should adjust energy according to depth of tattoo color, hold the handle and move it to treatment area slowly to make customer feel acceptable in mentally. Right now, the speed of flash could be set 3HZ, keep head of the handle a two-finger distance to treatment area, start treatment from head of eyebrow to end of eyebrow. It is needed to treat again in 5-10 minutes if the color of tattoo re-appear.
2. Remove eye line
The speed of flashes could be set 4-5HZ,adjust the energy of light to minimum energy, keep a one-finger distance between head of handle and treatment area. Operator should strictly protect customers’ eyes with panel for eyelid or medical pledget (panel for eyelid)of 1cm depth.
Treatment should be started from down eye line, customer should deeply close eyes and keep eyeball up-sight inside. Operator should press the pledget (panel for eyelid) with forefinger and push up eyelid, peel down eyelid with middle finger to bare the eye line, treat it with flashes of 4-5Hz. Then, treat up eye line. Also customer should close eyes and keep eyeball down-sight inside. Operator should press the pledget (panel for eyelid) with middle finger and push eyelid down, push eyelid up with forefinger to bare the eye line, treat it with flashes of 4-5Hz.
3. Remove lip line
The speed of flashes could be set 5Hz,keep a 3/4 finger distance between head of handle and treatment area. It is better to remove black, coffee, deep, red and brown lip line with 1064nm head at first time and then, treat again with 532 nm head.
Notice: All tattoos in lip should be treated in 6 months after making. OR removal treatment will fail. It should have 45-60 days interval to continue next treatment until remove all.
4. Remove tattoo
The speed of flashes could be set 3Hz/5Hz.It is better to use high energy for treatment until treatment area seeps a little blood. It should have 45-90 days interval to continue next treatment until remove all.
5. Remove spot and nevus
The speed of flashes could be set 3Hz/5Hz.Keep 3-4 fingers distance between head of handle and treatment area. It is better to use high energy for treatment until treatment area seeps a little blood. It is advised to use 1064 nm head for normal spot and nevus treatment, but for deep color spot and nevus, it is better to use 532nm head for treatment. It should have a 15-30days interval to continue next treatment until remove all.
6. Remove birthmark
The speed of flashes could be set 3Hz/5Hz.It is better to use high energy for treatment until treatment area seeps a little blood. It is advised to use 1064nm head for birthmark treatment, but for red and deep color birthmark, it is better to use 532nm head for treatment. It should have 45-90 days interval to continue.
Why our YAG laser machine better than other similar product?
1.Instantaneous blasting high laser technology, international standard of production, technical test strictly imported stone Q-switch cassette mechanism, the entire solid laser, without replacing Q-switch.
2.Pulse Energy is up to 500mj and pulse width can reach 10ns.
3.The laser gun inside is made by porcelain which is anti-high temperature and anti-corrosion. This is much better than glass, such as "Poly Compound" which will release TOXIN under high temperature. Until now, porcelain is still the best and stable material for laser gun.
4.The operation interface of whole English LCD screen, computer monitor, the temperature and pressure of the water warning system.
5.Two systems of circuit preventing wrong operation. Imported components from Europe with quality guaranteed.
Technical parameters of YAG laser machine:
Wavelength: 1064/532nm
Screen: 6.4" color-touch screen
Joint part: Adopts the most advanced (Plug-and-play) joint part
Type of laser: sapphire and ruby switch Q/KTP/YAG laser instrument
Pulse energy: 1600mJ
Instruction light: infrared ray indicator
Width of pulse: 6ns
Frequency: 1 to 6Hz
Spot diameter: 3-9mm
Cooling system: Wind + water + semiconductor
Voltage 110/220V, 5A, 50/60Hz
Packing list of YAG laser machine:
1. 1 × Main machine body
2. 1 × 532nm tip (mainly used for red, coffee and brown pigment treatment)
3. 1 × 1064nm tip (mainly used for blue, black and cyan pigment treatment)
4. 1 × Water funnel
5. 1 × Package box
6. 4 × Key (two for the machine, two for the package box)
7. 1 × Foot touch
8. 1 × Protective goggle
9. 1 × Power line (we stock 110V-240V power version and US.UK.UA.EU plugs for the country all of the world)
Payment terms
-Sample Charge: T/T or Western Union
-30% deposit before production, 70% balance before shipping
Packing and shipping
-Standard Export Carton with fully Polyfoam or Pearl Wool
-Delivery within 5 to 15 working days upon receiving payment
After-Sales-Service
-Lifetime with professional engineer support.
-Within 1 year, supply spare parts for free if the machine has quality problem.