Technique characteristics
ZXQ-1050H type automatic die-cutting machine, is based on domestic broad user’s requirement, using international advanced techonlogy launched high-efficient type paper prcessing machine that subject adopts advanced resin sand casting ductile iron, for whole structure provides a solid guarantee, make the machine reached the maximum capacity, multi- function, high security and humanized operate interface.
Parameters
|
Model
|
ZXQ-1050H
|
|
Biggest lose paper wide
|
1050*740mm
|
|
Minimum lose paper wide
|
400*360mm
|
|
Biggest die-cutting wide
|
1040*730mm
|
|
Die-cutting thickness
|
120-600g/ m2<=4mm
|
|
Die cutting spead
|
7000 sheets/h
|
|
Die-cutting pressure
|
300*10000N
|
|
The weight
|
15.5T
|
|
The total power
|
20Kw
|
|
Min.Holding Width
|
9.5mm
|
|
Envelop dimensions
|
7000*4000*2100mm
|
Parts Introduction:
Feeder: The feer adopts the European technology with four suckers and four blower. The suckers are adjustable to ensure the steady conveying of different type and shape of paper without stopping the machine.The easy to be adjust functions can do thin and thick paper for an accurate convey.
Paper feeding part:
The sheet separa-tor is reliable and feeder is fast and stable, There are 4-8 suker suitable for various thickness of the paper. The special vice feeding mechanism and its relative suggestive systerm ensure continuous feeding in running time, Collection of paper to paper all the Motor speed with Taiwang Gang
Paper feeding part
The pressure of the paper conveying belt can easily be adjusted to ensure the constant conveying of paper to paper to the desired position with little break down time. The paper conveying belts are imported and rubber presss and the hair pressers are high wear-resisting.
Die-cutting Part:
The die-cutting plate are specially designes for safe, easy to operate.. The penumatic locking device makes the fixing of the plate strong , accurate and time-saving.
Paper delivevry part:
paper’s delivevry automatic and orderly. Efficiency can be greatly increased as the vice delivevry device in running time is adopted. Paper sheets to be cut can be checked anytime in running with the samping mechanism
Electric Control:
The machine is control by FUSHI PLC. All the electric parts are either from Japan, France, Germany or taiwan .The man machine interface provides accureate working states of the machine
Man- machine interface
The high-resolving power interface in the machine can inspect working tate of the machine and display all information . It is convenient and reliable for machine’s adjusting and trouble- shooting,
Main Chain Driver:
Germany the main chain drive, the Taiwan agencies intermittebt drive, The imported divider and clutch makes chain to run intermittently to ensure the safety to man and reduce the damages to the machine
Crank Shaft:
They adopts high quality steel alloy specially processed to ensure high precision, long working hours and low abrasion.
Pneumatic Clutch:
Adopt imported pnenmatic clutch, long life and low noise, braking stable.
Side Lay:
The side lay, after special design, contains push and pull. You can choose the proper one according to the different products with no need of changing parts. There is little movement of paper while the side lay is working and no worn for paper that contribute to transfering paper in high speed.
Gripper Bars: