The advantages of the equipment:
1. The circular arc is to use equipment out, and the market usually is to clap out, but the defect is to have indentation, to make a word the result is bad.
2. The whole machine noise is small, except air pump the other were no noise, you can put the air pump outside, or on sound insulation better place.
3. The tightness of rewinding can you adjust the belt, this will greatly extend the life of the belt.
4. The height and thickness of the materials can be adjusted, width can be 6.0-12.8 cm.
5. The processing speed is fast, according to the complex degree, two to three times faster than other machines.
6. Cutting saw blades, use 4-5 years completely no problem, to avoid the trouble of change blades.
7. Save format is ai and PLT (carving machine)
8. When acrylic pressure side is less 0.4 to 0.5 mm than surrounding edge.
9.Software is very simple, easy to operate, technical staff will not leave unill you can operate it, guarantee the quality of service.
10.The software is english
.
1. The circular arc is to use equipment out, and the market usually is to clap out, but the defect is to have indentation, to make a word the result is bad.
2. The whole machine noise is small, except air pump the other were no noise, you can put the air pump outside, or on sound insulation better place.
3. The tightness of rewinding can you adjust the belt, this will greatly extend the life of the belt.
4. The height and thickness of the materials can be adjusted, width can be 6.0-12.8 cm.
5. The processing speed is fast, according to the complex degree, two to three times faster than other machines.
6. Cutting saw blades, use 4-5 years completely no problem, to avoid the trouble of change blades.
7. Save format is ai and PLT (carving machine)
8. When acrylic pressure side is less 0.4 to 0.5 mm than surrounding edge.
9.Software is very simple, easy to operate, technical staff will not leave unill you can operate it, guarantee the quality of service.
10.The software is english
|
Input voltage
|
220V
|
|
Power
|
400W
|
|
Size
|
160*80*165cm
|
|
Weight
|
120Kg
|
|
Processing speed
|
32m/min.
|
|
Max. processing size
|
>3m
|
|
Min. processing size
|
>10cm
|
.