Product Description
\Technical data:
1. Raw material: Wood pulp
2. Output paper: High grade toilet paper
3. Grammage: 13_30G/M2
4. Net paper width: 550mm
5. Wire width: 550mm
6. Capacity: 5T/D
7. Working speed: 150m/min
8. Rail gauge: 2900mm
9. Drive way: AC frequency conversion speed, section drive.
Main machinery and technical parameter:
1. Cylinder part: Stainless-steel cylinder mould Φ 1500× 2200mm 1 set,Pulp spray cylinder molding machine 1set, adjustable speed pulp roll make paper even, consistency: 0.1-0.15%. Wire mesh with more than 90-100layers. There is no pulp and vestige.This make paper even and have strength of landscape orientation and portrait.
2.Couch roll: φ 400× 2350× 2900mm, roll is made of seamless pipe, pipe width: 14mm, roll is covered with rubber, rubber width: 25mm, rubber shore hardness A30-35° .
3. Wire part is jointed by profiled bar, width of profile bar is 10mm.
4. Felt washer equipment of wire part: Water pressure piping schema, which can move, ceramics nozzle, which is hard to be worn.
5. Felt washing section: High pressure washer 2sets, water pressure piping schema, which can move, water pipe is made of stainless steel pipe with ceramics nozzle, which is hard to be worn.
6. Vacuum suction box: 4sets, one is beak pattern suction box with width of 150mm, the other three with width of 250mm, body of box is jointed by armor plate, material is polythene.
7. This Stander is box pattern cast iron stander, material is HT200, vertical bar is 400mm wide, it is special width, height of the bar of dryer is 400mm.
8. Dryer can: φ 2500× 2200× 2900mm, rubber shore hardness 210° , dryer is from Dandong in China.
9. Cylinder press knife use steam as power, including control box, steam drum.
10. Touch roll: φ 550× 2350× 2900mm, cast iron roll is covered by robber, width of robber is 25mm, rubber shore hardness 93° Steam pressure.
11. Felt roll: φ 194× 2450× 2900mm, seamless pipe (pipe width 12mm). The cover is chrome plated.
12. Unfold roll: φ 230× 2350× 2900mm, it is covered with rubber, rubber shore hardness 93° .
13. Exhaust hood: Breathing hood, blower, transpire hot wind.
14. Electrical strength felt, stream adjustable felt machine.
15. Winding part: Cold cylinder φ 900× 2200× 2900mm, bearing 113520, width is 14mm. This Stander is box pattern cast iron stander, it is jointed by steel plate, unfolding paper roll φ 73mm, arch roll, cover is chrome plated. Soft pressed rollφ 240× 2200mm, seamless pipe, it is covered by rubber, rubber shore hardness 35° , bearing 3612, winding paper rollφ 50mm, seamless pipe.
16. Basic section: 360× 2700 three vat track 2sets230× 2100 single vat track 2sets230× 1500 single vat track 4setsMotor, Deceleration machine, track 8sets
17. Drive section:Drive point Deceleration machine motorCylinder JZQ500 37KWWinding machine JZQ250 4KWFrequency conversion adjustable speed