GAS AGENRATOR TYPE: 200kw Gas Generator /natural gas geneator/bio gas generator
;200kw Gas Generator;gas generators;gas powered generator;gas home generator;gas generator;
|
Model
|
Dimension (mm) L×B×H
|
Net Weight (kg)
|
Instruction
|
|
200GF-RG/PwG
|
5300×1970×2250
|
8100
|
Open cooling method for heat exchanger
|
|
4510×1970×2260
|
7500
|
Closed cooling method for horizontal water box with more than one fan |
|
Name of Parameter
|
Value of Parameter
|
|
|
Model of the set
|
200GF-RG
|
200GF-PwG
|
|
Model of gas engine
|
G6190ZLDK-2A
|
|
|
Model of generator
|
1FC6 354-6LA42
|
|
|
Rated power(kW)
|
200
|
|
|
Rated current(A)
|
288
|
|
|
Rated voltage(V)
|
400
|
|
|
Rated frequency(Hz)
|
50
|
|
|
Rated rotated speed(r/min)
|
1000
|
|
|
Rated power factor(cosφ)
|
0.8(lag)
|
|
|
The number of phase and the wiring method
|
Three coils wired by three phase lines or three coils wired by three phase lines and one zero line. |
|
|
Way for adjusting pressure
|
Automatic adjusting pressure
|
|
|
Excitation method
|
Brushless excitation
|
|
|
Starting up method
|
24VDC Electric starting system
|
|
|
Name of Parameter
|
Value of Parameter
|
|
Model
|
G6190ZLDK-2A
|
|
Number of cylinder
|
6
|
|
Arranging way of cylinders
|
Straightly arranged
|
|
Diameter of cylinder(mm)
|
190
|
|
Route(mm)
|
210
|
|
Total displacement(L)
|
35.73
|
|
Air inflow way
|
Increasing the pressure by using the exhaust produced by the generator to promote the operation of the turbine, thus improve the inlet pressure. The intercooler for air inflow is also used. |
|
Rated power(kW)
|
210
|
|
Rated rotate speed(r/min)
|
1000
|
|
Min. stable rotate speed with empty load(r/min)
|
600
|
|
Dimension(L×B×H) (mm)
|
3226×1120×2005
|
|
Net weight(kg)
|
4500
|
Conditions for Using
1. Temperature of the straw gas should not surpass 40â?? when it is 1m or nearer to the pressure regulating valve for air inflow.
2. The pressure that this biomass generator set can sustain ranges from 3kPa to 10 kPa and the fluctuated frequency of the pressure should not surpass 1kPa/min.
3. The granularity of the impurity should not surpass 5 μm and its max. content is 30mg/Nm3.
4. For the straw gas used in this biomass generator set, the volume content of H2 should not surpass 20% and the max. content of H2S, NH3 and tar are 50mg/Nm3, 20mg/Nm3, and 50mg/Nm3.
5. The moisture content in straw gas should not surpass 40g/Nm3 and the heating value of the gas should not be lower than 4MJ/Nm3.
For gas that cannot reach the conditions above, special allocation will be tookfor this biomass generator set after evaluation according to the specific composition, pressure, temperature, etc. provided.
Technologies Used
This biomass generator set uses electrically fuel gas mixing technology, low-pressure air inflow technology, automatic control technology for burning and safe conveying system.