high intensity ceramic proppant of low rupture rate

1. Categories of ceramic proppants:
ceramic proppants can be classified according to its type:
Control -- no pressure consolidation support agent, high strength, fast consolidation speed, good permeability, low density
To prevent fracturing pressure support - -spit consolidation, high strength, low permeability, crushing ratio, low density
Support - -coated good compressive capacity, long service life in the lower strata of 232 degrees Celsius temperature
Quartz support - low solubility, suitable for low acid fracturing acidification support, higher spheres and diverting capacity
 

2 ceramic proppants can also be classified according to its fracture resistance capability: 7500psi (69Mpa), 10000psi (69Mpa), 12500psi(86 Mpa).

According to the bulk density, it also can be classified into the low, medium and high bulk density ceramic proppants
The size of ceramic proppants can be classified into: 12-20 mesh, 16-20 mesh, 16-30 mesh, 20-40 mesh, 30-50 mesh, 40-60 mesh, 40-70 mesh, 70-100 mesh, etc. GMRC is now developing ceramic proppants with different intensity and different sizes to meet various demand for oil and gas well both domestic and abroad.

Size μm	Bulk Density g/cm3	Closing pressure MPa	Rupture stress kN	Rate of rupture %
850~425(20/40mesh) 600~300(30/50mesh)	≤1.65 / ≤3.00	52 69	105 140	≤5.0 ≤5.0
	≤1.80 / ≤3.35	52 69 86	105 140 174	≤5.0 ≤7.0 ≤9.0
	>1.80 / >3.35	69 86	140 174	≤5.0 ≤9.0