Product Main

Specifications

 Environmental protection
a>    Waste-gas : during the process of pyrolysis , there will cause 5% waste-gas, but the waste-gas can be burnt again in the reactor as fuel materials to keep the temperature in the reactor, have you noticed the green hole in the reactor, the waste-gas enter into the hole and is burnt again. So there is no waste-gas at all.
b>    Waste-water: there is a water-recycling system in the set of plant, all the process, the water can be used circulatory. So there is no waste-water in the process of pyrolysis
c>     Bad smell: there will be some chemical substances feed into the catalysis tower and burnt together with the tires. It can get rid of bad smell and improve the quality of oil.
d>    Emission controller: there is emission controller in the set of plant, it won’t cause     dirty dust in the process of pyrolysis
Technology specialty
NO
Name
parameter
1
The raw materials:
waste tires, plastics and oil sludge
2
Total Capacity:
5t/day,10t/day,20t/day,50t/day,100t/day
3
the size of reactor:
2.2*4.5m, 2.2*6m,2.4*6m,2.6*6m,2.8*6 m
4
Average oil productivity:
Tire:40%-50%,plastic:60%-70%
5
Average carbon productivity:
30%-35%
6
Average steel productivity:
10%-15%
7
Average waste-gas productivity:
5%
8
Pyrolysis time:
8 hours
9
Discharging time:
3 hours
10
Feeding time:
1 hour
Safety system: there are two water seal tank in the set of plant, they can prevent gas back streaming and clean the waste-gas to make the plant more safety.
There are safety alarms in the temperature gauge and pressure gauge, so when the tempura and pressure is abnormal, the alarms will ring then you could some safety precautions in time.