sanitary silicone sealant, acetic silicone, kitchens and bathroom silicone, waterproof silicone
Applications:
Packing Specification: 250ml / 280ml / 300ml / 310ml(net capacity) hard package (the actual weight is subject to final products); 30ml, 60ml, 90ml, 100ml with blister card; 190kgs by drum;
TECHPOWER PREMIUM SANITARY SILICONE SEALANT
Property
TECHPOWER129 is a premium general purpose silicone sealant for use in humidity enviroments such as kitchens and bathrooms. It is an ideal sealant for construction sealing applications where mildew resistance is required.
Properties:
Rapid curing.
Rapid curing.
Perfect adhesion to most non-porous substrates.
No shrinkage, 100% silicone
Resists mildew even in prolonged hot and humid enviroments.
Stays permenantly elastic.
Acetoxy curing system.
Resistance to aging, cracking and discoloring.
Resistance to many chemicals, cleaning agents and detergents.
One component, moisture-cured.
Applications:
Sealing around bathtubs, shower tubs, sinks
Building joints in humid enviroments
Sealing applications in kitchens
Sealing around shower cabins.
Sealing applicatons in air conditioning systems
Sealing sanitary technical applicances and kitchen applicances.
Instruction:
Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
Make sure fill the interface with it and tightly stick to the base material .
Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
Make sure fill the interface with it and tightly stick to the base material .
Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
Voluntary Standard: GB/T14683-2003
Emergent Treatment
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.
Storage
Keep in dry place; dont unseal it before use; keep a storage temperature below 25 to prolong its service life; 12 moths guarantee.
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.
Storage
Keep in dry place; dont unseal it before use; keep a storage temperature below 25 to prolong its service life; 12 moths guarantee.
Packing Specification: 250ml / 280ml / 300ml / 310ml(net capacity) hard package (the actual weight is subject to final products); 30ml, 60ml, 90ml, 100ml with blister card; 190kgs by drum;
Optional Color: Black, white, transparent, grey or on requested.
Testing Standard: GB/T14683-2003 Silicone Building Sealant
|
NO.
|
Item
|
Data
|
|
1
|
Type
|
Acetoxy
|
|
2
|
Density g/cm3
|
0.96
|
|
3
|
Capacity movement
|
±30%
|
|
4
|
Skinning time
|
5-15 minutes
|
|
5
|
Drying time(2mm/h)
|
10-12
|
|
6
|
Drying(4mm/h)
|
24-30
|
|
7
|
Max. Tensile strength
|
1.3
|
|
8
|
Hardness shore
|
18±2
|
|
9
|
Elongation at Break(%)
|
≥500
|
|
10
|
Modulus Mpa(100%)
|
0.55
|
|
11
|
Application temperature
|
-20 to +40
|
|
12
|
Temperature resistance
|
-50 to +100
|
|
13
|
adhesive
|
OK
|
|
14
|
Weatherproof
|
OK
|
|
15
|
Cold-hot adhesive
|
OK
|
|
16
|
Under water adhesive
|
OK
|
|
17
|
Elastic Recovery Ratio
|
96
|
|
18
|
Mass-loss Rate
|
40
|
|
Skin drying time and fully drying time under: 23 and 50% humidity
|
||