Detailed Product Description
weathering resistant; ultraviolet resistant; ozone resistant; water resistant; high and low temp
Storage
Keep in dry place and keep a storage temperature below 25 to prolong its service life; 12 months guarantee.
weathering resistant; ultraviolet resistant; ozone resistant; water resistant; high and low temp
Characteristics:
- TECHPOWER127 belongs to RTV-1,acetoxy cure, high tensile strength, fast curing. Translucent, no change of color.
- Excellent resistance to weather.
- Excellent resistance to low and high temperature change. Little changes of performance at -400C ~1500C;
Purpose:
- Sealing in glass joints;
- For structural glazing in glass curtain wall.
- For structural glazing in big glass and glass roof structural engineering.
Application Standard:
- China Standard GB/T 14683-2003 Silicone Building usages Sealant
Restriction of Usage:
- Can't be used to marble, granite and other alkalescence materials;
- Unsuitable for the surface of all kinds of material that can effuse grease, plasticizer or solvent;
- Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant;
- Unsuitable for the frosty or moist surface;
- Unsuitable for the continually soggy or moist place;
- Can't be used the product, if the temperature is below 40C or above 400C on the surface of the materials.
Satefety:
- Non-toxicity when cured.
- Avoid eye contact before curing. If happened, rinse opened eye for several minutes under running water, then consult with a doctor.
- Keep away from children.
- Ensure adequate ventilation at workplace or curing area.
Storage
Keep in dry place and keep a storage temperature below 25 to prolong its service life; 12 months guarantee.
Packing Specification: 40ml, 90ml by alumunium tube with blister, 230ml, 280ml, 300ml, 310ml by plastic cartridge; 190 KGS by drum
Optional Color: Black, white, transparent, silver-grey or appointed color of clients
Testing Standard: GB/T14683-2003 Silicone Building Sealant
Testing Standard: GB/T14683-2003 Silicone Building Sealant
|
NO.
|
Item
|
Data
|
|
1
|
Type
|
Acetoxy
|
|
2
|
Density g/cm3
|
1.0±0.02
|
|
3
|
Capacity movement
|
±30%
|
|
4
|
Skinning time
|
4-9 minutes
|
|
5
|
Drying time(2mm/h)
|
4-6
|
|
6
|
Drying(4mm/h)
|
8-12
|
|
7
|
Max. Tensile strength
|
2.5
|
|
8
|
Hardness shore
|
25±2
|
|
9
|
Elongation at Break(%)
|
≥650
|
|
10
|
Modulus Mpa(100%)
|
0.76
|
|
11
|
Application temperature
|
-20 to +40
|
|
12
|
Temperature resistance
|
-50 to +150
|
|
13
|
adhesive
|
OK
|
|
14
|
Weatherproof
|
OK
|
|
15
|
Cold-hot adhesive
|
OK
|
|
16
|
Under water adhesive
|
OK
|
|
17
|
Elastic Recovery Ratio
|
96
|
|
18
|
Mass-loss Rate
|
5
|
|
Skin drying time and fully drying time under: 23 and 50% humidity
|
||