Wire Mesh Dome
The mesh domes are approximately semi-spherical but a little taller than a semi-sphere would be, and should have an opening about 7 centimeters across, with the dome height about 5 centimeters. As the pictures show, a flap of mesh should hang off one side of the opening so that the flap can be closed. Inside of the mesh dome is hollow. Wire mesh hole size should be around 1.5 centimeters. Mesh wire size should be around 22 gauge, and wire around the edge of the opening around 16 gauge. Wire should be galvanized - dipped or electro OK. Finish quality can be fairly low as these will be used in agriculture and buried underground. On all of these measurements and specifications, we are open to suggestions of similar different sizes if there is a different measurement that is more common and more efficient and cost-effective for your production and sourcing.
Hexagonal Wire Mesh
Wire Materials: Quality mild steel wire, stainless steel wire, galvanized iron, PVC coated wire .etc.
Weaving Patterns: Straight twist, reverse twist, double twist.
Process: Galvanized after weaving or galvanized before weaving.
Finish: Electric galvanizing, hot-dip zinc plating, stainless steel or PVC coated.
Color: PVC coated hexagonal wire mesh is green, white, grey or other colors; enamelled hexagonal wire mesh is green.
Assortments Available:
Hex. wire mesh in normal twist
Hex. wire mesh in reverse twist
Hex. wire mesh in bidirectional twists
Electro Galvanized before Weaving
Electro Galvanized After Weaving
Hot Dipped Galvanized before Weaving
Hot Dipped Galvanized after Weaving
PVC Coated Before or After Weaving
Application: Hexagonal wire mesh with its good corrosion resistance and oxidation resistance, serves well as strengthening, protection and temperature keeping materials in the form of mesh container, stone cage, isolation wall, boiler cover or poultry fence in construction, chemical, breeding, garden and food processing industries