Poly-lactic acid polylactide (PLA)
1. racemic polylactic acid (D, L-PLA) dl-polylactide
CAS.R.NO :51063-13-9 26680-10-4 34346-01-5
● amorphous polymers, glass transition temperature of 50 ~ 60 ℃.
● viscosity IV (dl / g) range: 0.2 ~ 7.
● approved by the FDA for injection can be used as micro-capsules, microspheres, and implantable sustained-release formulations of the auxiliary agents and interior fixtures.
● cell culture can be used as tissue engineering porous foam stent, porosity, pore size and degradation rate adjustable.
2. poly-L-lactic acid l-polylactide (L-PLA)
CAS.R.NO: 26261-42-2 33135-50-1
● crystalline polymers, the glass transition temperature of 60 ~ 65 ℃.
● melting point of 175 ~ 185 ℃,
1. racemic polylactic acid (D, L-PLA) dl-polylactide
CAS.R.NO :51063-13-9 26680-10-4 34346-01-5
● amorphous polymers, glass transition temperature of 50 ~ 60 ℃.
● viscosity IV (dl / g) range: 0.2 ~ 7.
● approved by the FDA for injection can be used as micro-capsules, microspheres, and implantable sustained-release formulations of the auxiliary agents and interior fixtures.
● cell culture can be used as tissue engineering porous foam stent, porosity, pore size and degradation rate adjustable.
2. poly-L-lactic acid l-polylactide (L-PLA)
CAS.R.NO: 26261-42-2 33135-50-1
● crystalline polymers, the glass transition temperature of 60 ~ 65 ℃.
● melting point of 175 ~ 185 ℃,
●viscosity IV (dl / g) range: 0.2 ~ 8.
● widely used in fixed installations such as bone plates, bone screws, surgical sutures, spinning and so on.
● widely used in fixed installations such as bone plates, bone screws, surgical sutures, spinning and so on.