SP series submersible sump pump/ vertical slurry pump

 

SP  type submerged slurry pumps are mainly applicable to transport abrasive, coarse particle, high concentration slurry. They are widely used in metallurgy, mining, coal, electric power, building materials, environmental protection and other departments.

Characteristics

 

1.SP (R) type submerged pumps are vertical centrifugal slurry pump, generally into the pool or pit to work, used to transport abrasive, coarse particle, high concentration slurry.

2. Don't need any shaft seal and shaft seal water, in the inhaled volume insufficient conditions  they can also work normally.

3.SP (R) type submerged pumps' pump body is made of wear-resisting metal. Impeller is made of wear-resistant metal or rubber, polyurethane SP (R) type submerged pumps parts into the liquid with rubber lining,they are all  applicable to transport corrosive slurry.

Standard

 

1. Standard pump into the liquid depth is 1.2 meters , the highest speed is 1150 r/min.

2.When pump into the liquid depth of 0.9 m, the highest speed is 1500 r/min,

3. When pump into the liquid depth of 1.5 m, the highest speed is 1000 r/min,

4. Standard dipping into the liquid depth is 0.9 meters. Allowed  the most high power is15 KW .

 

SP, SPR series submerged slurry pumps's technology parameters

Capacity     17-1267m3/h

Head           4-40m