For fastening:
Pipe lines to walls,cellings and floors in the sanitary and heating area.
Properties:
| Material | steel DD11(material no.1.0332) acc.to DIN EN 10111 |
| Zinc plating | electro zinc plated,6-8µm |
| Resistance welded nut | M8(sw 13),H=6.8mm,8.0mm,12.0mm |
| Resistance welded nut | M8/10(sw 13),H=17.0mm |
| Resistance welded nut | M8/10(sw 17),H=18.0mm |
| Locking screw | combi-slot cheese head screw |
| Acoustic insulation lining | material:EPDM;chlorine-free;silicone-free |
| Sound insulation | for DIN 4109 |
| Temperature range | -50° to +110°C |
| Hardness | 45+-5° Shore |
| Fire behaviord | DIN 4102:class B2 |
Facility:
Stamping machines, punching machines,bending machines,welding machines, lathes and so on.
Avantages:
1.Quicking locking single screw pipe clamp enables one-hand mounting.
2.A pipe is preassembled by mere snapping.
3.The quick-clamping system protects the clamp against uncontrollable opening after snapping.
4.Compact structural design of the clamp enables simple and full piping insulation without larger overlap in the area of the toggle and closing device. All this is possible even using a small thickness of insulating material.
5.It prevents the action of electrolysis.
6.Single-screw pipe clamps with a snap lock satisfy the highest requirements while mounting on walls, ceilings and floors but also in connection with pipes used in sanitary installations.
7.The pipe clamp is checked regarding noise protection according to DIN 4109.
8.Fire behavior:DIN 4102 class:B2.
Usage:
1.steel pipes
2.cast iron pipes
3.copper pipes
4.glass pipes
5.plastic pipes
Field:
Field:
1.sanitary and heating installations
2.gas distribution systems
3.air conditioning systems