For fastening:
Pipe lines,such as heating,sanitary and waste water pipes,to walls,cellings and floors.
Properties:
| Material | steel DD11(material no.1.0332) acc.to DIN EN 10111 |
| Zinc plating | electro zinc plated,6-8µm |
| Resistance welded nut | M8(sw 13),H=6.8mm,8/0mm,12.0mm |
| Resistance welded nut | M8/10(sw 13),H=17.0mm |
| Resistance welded nut | M8/10(sw 17),H=18.0mm available |
| Locking screw | combi-slot cheese head screw |
| Acoustic insulation lining | material:EPDM;chlorine-free;silicone-free |
| Sound insulation | for DIN 4109 |
| Temperature range | -50° to +110°C |
| Hardness | 45+-5° Shore |
| Fire behavior | DIN 4102:class B2 |
Facility:
Stamping machines, punching machines,bending machines,welding machines, lathes and so on.
Avantages:
1.Compact structural design of the clamp enables simple and full piping insulation without larger overlap in the area of the toggle and closing device. All this is possible even using a small thickness of insulating material.
2.It prevents the action of electrolysis.
3.Two-screw pipe clamps satisfy the highest requirements while mounting on walls, ceilings and floors but also in connection with pipes used in sanitary installations.
Application:
1.Used for mounting of pipes to the walls (vertical / horizontal),ceilings and floors
2.For Suspending Stationary Non-Insulated Copper Tubing Lines
3.Being fasteners for pipe lines such as heating,sanitary and waste water pipes;to walls,ceilings and floors.
4.Side screws are protected against loss during assemble with the help of plastic washers
Usage:
1.steel pipes
2.cast iron pipes
3.copper pipes
4.glass pipes
5.plastic pipes
Field:
1.sanitary and heating installations
2.gas distribution systems
3.air conditioning systems