Features
|
Dual channel 100MHz |
Time base auto-range |
Cursor readout with 7 measurements |
Panel lock function
|
Buzzer alarm
|
LED indicators
|
TV synchronization, trigger signal output |
Z-axis modulation input |
Delayed sweep |
Vertical system
|
|||||||
Sensitivity
|
2mV~5V/DIV, 11 steps in 1-2-5 sequence |
||||||
Sensitivity accuracy
|
≤3% (6×8DIV at the screen center) |
||||||
Vernier sensitivity
|
Continuously variable to 1/2.5 or less than panel indicated value |
||||||
Bandwidth
|
DC (AC 10Hz)~100MHz (2mV/DIV: DC~20MHz) |
||||||
AC coupling
|
<10Hz (at 100kHz, 8DIV, frequency response -3dB) |
||||||
Rise time
|
Approx.3.5ns (2mV/DIV: Approx.17.5ns)
|
||||||
Input impedance
|
Approx.1MΩ±2%//Approx.25pF
|
||||||
DC balance shift |
5mV~5V/DIV: ±0.5DIV |
||||||
Vertical mode |
CH1, CH2, DUAL (ALT/CHOP), ADD, CH2 INV
|
||||||
Chopping repetition frequency |
Approx. 250kHz |
||||||
Bandwidth limit
|
20MHz
|
||||||
Input coupling |
AC, GND, DC
|
||||||
Max. Input voltage |
300V peak-peak (AC: frequency≤1kHz) |
||||||
Common mode rejection ratio |
>50:1 or better at 50kHz
|
||||||
Dynamic range
|
5DIV at 100MHz
|
||||||
Polarity (INV)
|
CH2
|
||||||
CH2 INV BAL
|
Balanced point variation≤1DIV (referred to graticule center) |
||||||
CH1 signal output
|
Not provided
|
||||||
Signal display
|
Not provided
|
||||||
Horizontal system
|
|||||||
Horizontal mode |
MAIN (A), ALT, DELAY (B)
|
||||||
A (main) sweep time base
|
50ns~0.5s/DIV, continuously variable (UNCAL)
|
||||||
B (delay) sweep time base
|
50ns~50ms/DIV
|
||||||
Sweep time base accuracy |
±3%, X10 MAG: ±5%
|
||||||
Sweep magnification |
X10 (Max. sweep time base: 5ns/DIV)
|
||||||
Hold off time
|
Variable
|
||||||
Delay time
|
1us~5s
|
||||||
Delay jitter
|
Better than 1:20000
|
||||||
Alternate separation
|
Variable
|
||||||
Trigger system
|
|||||||
Trigger mode
|
AUTO, NORM, TV-V, TV-H
|
||||||
Trigger level lock
|
Not provided
|
||||||
Trigger source |
CH1, CH2, LINE, EXT |
||||||
Trigger coupling
|
AC, DC, HFR, LFR
|
||||||
Polarity
|
“+” or “-” polarity |
||||||
Sensitivity
|
Mode
|
Auto
|
Norm
|
TV
|
|||
Frequency
|
10Hz~20MHz
|
20MHz~100MHz
|
DC~20MHz
|
20MHz~100MHz
|
Sync signal
|
||
INT
|
0.35 DIV
|
1.5 DIV
|
0.35 DIV
|
1.5 DIV
|
1 DIV
|
||
EXT
|
50mVpp
|
150mVpp
|
50mVpp
|
150mVpp
|
200mVpp
|
||
TV sync
|
TV-V, TV-H
|
||||||
Trigger level range
|
INT: 4DIV or more, EXT: ±0.4V or more |
||||||
External trigger output signal |
Input impedance: Approx.1MΩ±5%//Approx.25pF
Max. input voltage: 400V (DC+AC peak), AC≤1kHz |
||||||
Trigger signal output
|
Voltage: approx.25mV/DIV into 50Ω termination Frequency response: DC~10MHz Output impedance: approx. 50Ω |
||||||
Z-axis
|
|||||||
Coupling
|
DC
|
||||||
Bandwidth
|
DC~5MHz
|
||||||
Voltage
|
5V or more |
||||||
Max. input voltage
|
30V (DC+AC peak, AC frequency≤1kHz) |
||||||
Cursor readout function
|
|||||||
Cursor measurement function |
ΔV, ΔV %, ΔVdB, ΔT, 1/ΔT. ΔT, ΔT%, Δθ
|
||||||
Cursor resolution |
1/25DIV
|
||||||
Effective cursor range |
vertical: ±3DIV; Horizontal: ±4DIV |
||||||
Panel setting |
Vertical: V/DIV (CH1, CH2), UNCAL, ALT/CHOP/ADD, INV, Probe factor, AC/DC/GND Horizontal: S/DIV (MTB, DTB), UNCAL, X10 MAG, delay time, HO Trigger: source, coupling, slope, level, TV-V, TV-H Others: X-Y, LOCK |
||||||
Calibration signal
|
|||||||
Waveform
|
Positive-going square wave |
||||||
Frequency
|
Approx.1kHz
|
||||||
Duty ratio
|
<48:52
|
||||||
Output voltage |
2Vp-p ±2%
|
||||||
Output impedance |
Approx.1kΩ
|
||||||
X-Y mode
|
|||||||
Sensitivity
|
X-axis, Y-axis selectable X-axis: CH1, CH2, sensitivity: 2mV~5V/DIV, ±3% Y-axis: CH1, CH2, sensitivity: 2mV~5V/DIV, ±3%
EXT: 0.1V/DIV, ±5%
|
||||||
X-axis bandwidth |
DC~500kHz (-3dB) |
||||||
Phase error
|
≤3°at DC~50kHz |
||||||
CRT
|
|||||||
Mode
|
6" rectangle, internal graticule 0%, 10%, 90% and 100% markers |
||||||
Display area
|
8×10DIV (1DIV=1cm)
|
||||||
Phosphor
|
P31
|
||||||
Accelerating voltage |
Approx.16kV
|
||||||
Trace rotation |
Adjustable at front panel
|
||||||
CRT illumination
|
Not provided
|
||||||
General
|
|||||||
Power source
|
AC110V/220V±10%, 50/60Hz, Max.35VA |
||||||
Dimension
|
310×150×455mm
|
||||||
Accessories
|
Power cord ×1, Operation manual ×1, Probe ×2 |
||||||
Weight
|
Approx.8kg
|
||||||