General Technical Characteristics
Dielectric: Polypropylene film
Construction: Extended double side
Metallized carrier film with internal series connection and metallized film
Coating: Solvent resistant plastic case with resin sealing. Flame retardant execution(UL94V-0)
Lead: Tinned copper lugs for screw fixing or soldering on PCBS.
Electrical Characteristics
Operating temperature range(case): -40 to +85C
Capacitance: 0.047 to 10uF
Rated Voltage: 700 to 3000Vdc
Tolerance: +-5%, +-10%
Dissipation factor: Measured at 1000+-20Hz AND 25+-5C
When Cr< 1.0uF, 4*0.001
When Cr>1.0uF, 6*0.001
Life expectancy: 100, 000 hours at Ur and 70C
Test Methods And Performances
Dielectric strength: 2Ur(DC)applied for 10s at 25+-5C(1 minute for type test)
Test voltage terminal to case: 3KV 50Hz for 60sec
Insulation resistance: 30, 000s but need not exceed 30GΩ (typical value), after 1 minute of electrification at 100Vdc(25+-5C)
Dielectric: Polypropylene film
Construction: Extended double side
Metallized carrier film with internal series connection and metallized film
Coating: Solvent resistant plastic case with resin sealing. Flame retardant execution(UL94V-0)
Lead: Tinned copper lugs for screw fixing or soldering on PCBS.
Electrical Characteristics
Operating temperature range(case): -40 to +85C
Capacitance: 0.047 to 10uF
Rated Voltage: 700 to 3000Vdc
Tolerance: +-5%, +-10%
Dissipation factor: Measured at 1000+-20Hz AND 25+-5C
When Cr< 1.0uF, 4*0.001
When Cr>1.0uF, 6*0.001
Life expectancy: 100, 000 hours at Ur and 70C
Test Methods And Performances
Dielectric strength: 2Ur(DC)applied for 10s at 25+-5C(1 minute for type test)
Test voltage terminal to case: 3KV 50Hz for 60sec
Insulation resistance: 30, 000s but need not exceed 30GΩ (typical value), after 1 minute of electrification at 100Vdc(25+-5C)