1,material:water washed pure poplar wood
2,size:1220*2440mm
3,thickness:2-18mm
4,high quality with reasonable price
1,SPECIFICATION
Size 1220*2440 or according to buyers' requirements
Thickness 2-18MM
Glue E2
Density Approx 750kg/m3
2,PROPERTIES
Moisture 4%-13%
Tolerance +/-7%
Modulus of inner combination 0.45MPA
Modulus of surface combination ≥1.2MPA
3, Formaldehyde emission level
E1 Average under 1.5mg/L. i.e. under 9mg per 100g
E2 Average under 5mg/L. i.e. under 30mg per 100g
Surface sanding / pressed
Screw holding face 1300N
Screw holding edge 800N
4,Usage
It is widely used for cabinets,wooden door and other furniture,etc.
Thickness 2-18MM
Glue E2
Density Approx 750kg/m3
2,PROPERTIES
Moisture 4%-13%
Tolerance +/-7%
Modulus of inner combination 0.45MPA
Modulus of surface combination ≥1.2MPA
3, Formaldehyde emission level
E1 Average under 1.5mg/L. i.e. under 9mg per 100g
E2 Average under 5mg/L. i.e. under 30mg per 100g
Surface sanding / pressed
Screw holding face 1300N
Screw holding edge 800N
4,Usage
It is widely used for cabinets,wooden door and other furniture,etc.
5,Advantages
a.It is dense, flat, stiff, has no knots and easily to be machined.
b. It does not have an easily recognizable surface grain, because it is made up of fine particles.
c. It can be easily painted to produce a smooth surface.
d. It has low "tear out," which means that when sawed, the end has a smooth cut instead of a jagged edge. This also means that a coat of primer and a couple of coats of paint take well, leaving an attractive, finished surface unlike other composite wood products.
e. MDF has good Density: profile with high bending strength and modulus of elasticity, dimension stability.
f. The MDF also with low formaldehyde content, smooth stable surface of MDF make it an ideal substrate for surfacing with decorative paper or PVC foils and direct painting.
a.It is dense, flat, stiff, has no knots and easily to be machined.
b. It does not have an easily recognizable surface grain, because it is made up of fine particles.
c. It can be easily painted to produce a smooth surface.
d. It has low "tear out," which means that when sawed, the end has a smooth cut instead of a jagged edge. This also means that a coat of primer and a couple of coats of paint take well, leaving an attractive, finished surface unlike other composite wood products.
e. MDF has good Density: profile with high bending strength and modulus of elasticity, dimension stability.
f. The MDF also with low formaldehyde content, smooth stable surface of MDF make it an ideal substrate for surfacing with decorative paper or PVC foils and direct painting.
we use international advanced equipment Defibrator Andritz Austria to produce MDF BOARD with the features of structural uniformity, smooth and delicate, with the thickness of 12-18mm and with annual output of 200,000 cubic meters. Products are exported to all over the world.