Turret Busbar Machine
Usage:
This machine is mainly used for different types of processing of copper or aluminium busbar.it is an ideal processing equipment for electrical appliance manufacture of high and low voltage.
Main characteristics:
1.one machine can carry out processing of punching,shearing and bending at the same time or respectively.
2.Punching unit adots turret type,can put 6 moulds at one time ,improving efficiency.
3.Through changing tools,the machine can do special processing work such as pressing,embossing,pressing cable joint,twisting and so on.
4.We adopt vertical machining method for punching and shearing unit,so operation is flexible and convenient using flatedge shearing method so the work piece surface is neater and smoother.
5.Adopting horizontal bending type to achieve flat bending and vertical bending by changing tools.
6.You can adjust working stoke of each unit conbeniently to reduce machining auxiliary time and improve production efficiency.
7.There are 4 trundles,so the machine can be moved conveniently by adjusting them.
Technical parameters:
Usage:
This machine is mainly used for different types of processing of copper or aluminium busbar.it is an ideal processing equipment for electrical appliance manufacture of high and low voltage.
Main characteristics:
1.one machine can carry out processing of punching,shearing and bending at the same time or respectively.
2.Punching unit adots turret type,can put 6 moulds at one time ,improving efficiency.
3.Through changing tools,the machine can do special processing work such as pressing,embossing,pressing cable joint,twisting and so on.
4.We adopt vertical machining method for punching and shearing unit,so operation is flexible and convenient using flatedge shearing method so the work piece surface is neater and smoother.
5.Adopting horizontal bending type to achieve flat bending and vertical bending by changing tools.
6.You can adjust working stoke of each unit conbeniently to reduce machining auxiliary time and improve production efficiency.
7.There are 4 trundles,so the machine can be moved conveniently by adjusting them.
Technical parameters:
|
|
|
ZTMX-303D
|
ZTMX-503D
|
|
Punching
|
Max power
(KN)
|
300
|
500
|
|
|
Punching
Diameter(mm)
|
ф4.3～ф25
|
ф4.3～ф34
|
|
|
Max thickness
(mm)
|
12
|
16
|
|
|
Max width
(mm)
|
150
|
250
|
|
Shearing
|
Max thickness
(mm)
|
12
|
16
|
|
|
Max width
(mm)
|
150
|
250
|
|
Bending
|
Max power
(KN)
|
300
|
500
|
|
|
Max width
(mm)
|
150
|
250
|
|
Vertical
Bending
|
Max width
(mm)
|
100
(10mm thick
copper)
|
120
(12mm thick
copper)
|
|
Embossing
|
|
√
|
√
|
|
Pressing
Cable Joint
|
|
√
|
√
|
|
Twisting
|
|
√
|
√
|
|
Outline
Dimensions
|
|
1300×1000×900
|
1500×1345×900
|
|
Power of Main
Motor (KW)
|
|
3×4
|
3×5.5
|
Accessories with machine:
4 sets of punching, 1 set of shearing, 1 set of flat bending, 1 set of vertical bending.