Dry Wall Partition Beam / Stud Partition Roll Forming Machine Layout

Forming Technology of Dry Wall Partition Beam / Stud Partition Roll Forming Machine:
Decoiler---feeding material ---roll-forming--- straightening ---mould cutting---completed product
Components of Dry Wall Partition Beam / Stud Partition Roll Forming Machine:
It is consisted of a decoiler, main forming machine, straightening part, cut-to length part, run-out table, electrical control system, etc.
Main Specifications of Dry Wall Partition Beam / Stud Partition Roll Forming Machine: 
Decoiler: Max load 1000kg
Main Forming Machine 
Portal-type frame style: A3 steel
Roller Station: 15 sets rollers 
Roller shaft diameter: φ36mm,surface: 200 mm
Raw material: 0.5mm - 1.3mm, Q195, Q235
Main motor: 5.5Kw
Roller: 1 set
Cutting part: automatic punching cutting style
Run-out table: roller style
Control system: PLC
 Max feed material width: at least 200mm
Delivery time: within 60 days
Dry Wall Partition Beam / Stud Partition Profiles

Relevant Dry Wall Partition Beam / Stud Partition profiles
There are many kinds of profiles of the dry wall partition beam & stud partition as different markets have different requirements, usually, we can design and produce the forming machines according to clients' drawings or samples.
Clients can take the above parameters and pictures as reference.
 

 

stud forming machine

1. working speed:12-15m/min (exclude punching and cutting)

2. Roller stations: 14 stations

3. Roller material: GCr15 steel, quenching HRC58-62,surface coated chrome with thickness 0.05mm

4. Main power: 4kw

5. Oil pump: 3kw

6. Hydraulic: 12Mpa

7. Control system: PLC, Panasonic

8. Coder: OMRON

9. Cutting system: Hydraulic, material:Cr12Mov

10. Size: 5500x800x750mm

11. Coil thickness: 0.5mm-1.2mm

12. Tolerance: 3m±1.5mm

13. Transmission: Chain