Technical parameter:
1.Rolling thickness:1.0-2.0mm

2.Rolling width:40-180mm

3.Speed:5-25 M/min (usual one) ,40M/min( fast speed.servo control system)

4.Forming steps: 9steps.

5.Power:5.5-15KW( based on product matching)---Electromagnetic speed motor (usual type)

Power:15KW,cutting power:11KW---Electromagnetic speed motor (usual type)

6.Working voltage 380v 50hz control voltage 24v

7.Main forming machine use welded steel structure

8.Transmission mode : gear wheel transmission( the material of the gear wheel use 45# steel, the surface disposed by high frequency )

9.Cutting method: Hydraulic automatic cutting/ flying saw manual cutting( customer matching)

Materials:

Main forming machine use welded steel structure

Roller shaft use 45# steel, modulation disposal, the hardness of the modulation is HB250-280.surface grinding. The outer diameter is 70mm

Roller mould use Gcr15,salt bath quenching.hardness is HRC58-62

The whole production line

uncoiler--- forming machine-- orthotics device-- cutting--recoiler--electric control box

Sales conditions:

1.FOB Tianjin Port price:

25,000$/set ------Hydraulic automatic, servo control system (FAST SPEED)

15,000$/set ------- Flying saw manual cutting

2.Delivery date:30days after the deposit

3.Payment terms:50%TT as deposit, rest 50% TT before delivery but after buyer;s inspection .

4.Packing: steel rack with wood board reinforcement,which suitable for long transportation.

5.Installation:buyer comes to the seller's factory to inspect the machine and receive the training for installation and operation.Seller should send a technician to buyer’s country for installation and operation under buyer's request,but all those cost should be taken by the buyer.

6.Provide the installation drawing and technical instruction for the customer.

7..Warranty period: the GUARANTEE of the equipment is one year,during this period,for the reason of machine itself cause the quality problem,the seller need to supply technical service, change the parts free. if not in warranty period, the buyer need to buy the parts themselves but the seller must supply at the cost price within five years.