A. Technical data:
1. Electric requirement:380v/3ph/50hz
2. Hydraulic motor power:7.5 kw
3. Weight:5 tons
4. Machine installation dimension:
(lxwxh) 7mx1.5 mx1.3 m
5. Forming speed:10 - 15 m per min
6. Thickness 0.4 - 0.8 mm,0.5 mm for test run and inspection
7. Material width: Approx.750 or 610 mm
8. Effective width of roof profile:610 or 470 mm
9. Max. Material strengthen: Cold rolled, pre-painted or galvanized coils or galvalume coils
10. Cutting tolerance: Approx.2mm (length = 5,000mm)
B. Features:
- interconvert automatically two levels of speed when stop and start.
- automatically shearing at any length with pre-setting quantity (10 programs).
- signal feedback from encoder showing current length of product.
- automatically alarm to rear shearing before the order finished.
- two shearing sets, one in the front and one in the rear.
- rolling wheel and shearers made of alloy steel, thermo-hardened, chromium plating get hardness 60-65hrc.
- hydraulic system is equipped with water cooling system to allow the machine working constantly from 12 to 16 hours per day.
1. Electric requirement:380v/3ph/50hz
2. Hydraulic motor power:7.5 kw
3. Weight:5 tons
4. Machine installation dimension:
(lxwxh) 7mx1.5 mx1.3 m
5. Forming speed:10 - 15 m per min
6. Thickness 0.4 - 0.8 mm,0.5 mm for test run and inspection
7. Material width: Approx.750 or 610 mm
8. Effective width of roof profile:610 or 470 mm
9. Max. Material strengthen: Cold rolled, pre-painted or galvanized coils or galvalume coils
10. Cutting tolerance: Approx.2mm (length = 5,000mm)
B. Features:
- interconvert automatically two levels of speed when stop and start.
- automatically shearing at any length with pre-setting quantity (10 programs).
- signal feedback from encoder showing current length of product.
- automatically alarm to rear shearing before the order finished.
- two shearing sets, one in the front and one in the rear.
- rolling wheel and shearers made of alloy steel, thermo-hardened, chromium plating get hardness 60-65hrc.
- hydraulic system is equipped with water cooling system to allow the machine working constantly from 12 to 16 hours per day.
Single Length Sheet up to 40 mts
The sheets are custom rolled to any transportable length maximum upto 13 meters. However, our specialized service of On-Site Roll Forming enables single length sheet up to 40mts long, without end laps - therefore on most jobs you can have single sheet from ridge to eaves resulting into zero laps, which are otherwise potential areas of leakage. Multicolor recommends avoiding end laps for total maintenance free roof. However if unavoidable two pieces clamped connection is recommended to Seal end laps.
The sheets are custom rolled to any transportable length maximum upto 13 meters. However, our specialized service of On-Site Roll Forming enables single length sheet up to 40mts long, without end laps - therefore on most jobs you can have single sheet from ridge to eaves resulting into zero laps, which are otherwise potential areas of leakage. Multicolor recommends avoiding end laps for total maintenance free roof. However if unavoidable two pieces clamped connection is recommended to Seal end laps.
Skilled Manpower and Intelligent Machine
We execute the job from roll forming to erection of roofing with quality and speed using best quality steel material.
We execute the job from roll forming to erection of roofing with quality and speed using best quality steel material.
Environmentally Responsible
The profile can be installed over an existing roof, and is completely recyclable.
The profile can be installed over an existing roof, and is completely recyclable.
|
Weather Tight
Roof panels are permanently seamed together with a full 3600
double lock seam to keep moisture out and designed as water and dust barrier. The raised seam assists drainage.
|
|
|
Roof Seamer The seaming process uses a heavy duty, Electric, portable roll forming machine Called the Roof Seamer. |
|
|
Clip Design
Roof clips securely attach the roof panels to the supporting structural by stainless steel tabs which are roll formed into the panel seam. Stainless steel tabs are than 50% stronger than other galvanized standing seam tabs. The clip design allows for 32 mm of movement in either direction to accommodate expansion and contraction forces. This permits buildings up to 500 feet wide without the need for special expansion joints. |
|
Design Freedom
High Strength
It has 51 mm high ribs providing strength and beauty The recommended minimum roof pitch for the profile is 20 ( 1 in 30 ). If the purlin and the roof plane are perfectly align, Multi-Seam can be
It has 51 mm high ribs providing strength and beauty The recommended minimum roof pitch for the profile is 20 ( 1 in 30 ). If the purlin and the roof plane are perfectly align, Multi-Seam can be
used for roof slope as low as 10. Steep Slope, Low Slope, and flat roof profiles can all be
designed with standing seam metal roof.