Introduction: Hammer mill also named hammer crusher, and crushes materials by the collision between high-speed hammer and materials. Hammer crusher is used to crush mid-hardness and weak corrosive materials, whose compressive strength is under 100 Mpa, and water ratio is less than 15%. Hammer mill possesses qualities of simple structure, large reduction ratio and high-efficiency.


Work principle: The motor drives the rotor of the hammer crusher at high speed through the belt, and on the rotor there are many hammers. when the material get into the working areas, they are crushed by the rotating hammers with high speed, then discharge required products from outlet. The large size products which are blow expectation are brought back to crushing area for crushing again until they reached the required size.

Model	Rotor speed (r/min)	Feed opening size  (mm)	Max feeding size (mm)	Discharging size (mm)	Capacity (t/h)	Motor  Power  (kw)	Weight  (t)	Overall dimension L×W×H (mm)
PC400×400	1500	145×295	100	0-30	5-8	7.5	0.9	844×942×878
PC600×400	1000	295×450	100	0-35	10-12	18.5	1.5	1000×1100×1300
PC600×600	1000	295×570	100	0-35	12-18	45	2.14	1315×840×1501
PC800×600	1000	350×570	120	0-45	20-25	55	2.45	1515×2586×1040
PC800×800	1000	350×850	120	0-45	35-45	55	3.05	1515×2831×1040
PC1000×800	1000	580×580	200	0-45	25-40	110	6.5	3206×2210×1515
PC1000×1000	1000	580×1060	200	0-45	40-80	132	7.59	3514×2230×1515
PC 1250×800	750	650×850	200	0-45	20-50	132	11.7	2630×1780×2050
PC1250×1250	750	650×1330	200	0-45	90-110	185	13.2	2630×2180×2050
PC1400×1400	750	1050×1540	250	0-45	120-170	280	17.2	2790×2800×2310
PC1600×1600	600	1500×1785	350	0-60	220-280	450	22.8	3350×3120×2660