Product Main

Specifications

Power amplifier CS2000, CS3000 PRO audio amplifier, CS4000 famous amplifer, China audio factory, China speaker factory, China amplifier audio system, guangzhou audio speaker factory, CS4080Hz amplifier, Paroyal audio system, professional audio equipment, PA audio System, paaudio, paroyal PRO audio
Model: CS1400 Power amplifier, CS2000 PA amplifier, CS3000 PRO amplifier, CS4000 Power amplifier , CS4080Hz Famous amplifier
  STEREO    MODE    (Both    Channels    Driven)
8    ohms            
Stereo Power 300    W 400    W 500    W 700    W 850    W 1000    W
4    ohms            
1KHz0.1%THD 450    W 620    W 750    W 1050    W 1300    W 1500    W
2    ohms            
  EIA    1kHz,     1% THD 720W 950    W 1200    W 1650    W 2000    W 2400W
  BRIDGE    MONO    MODE
8    ohms            
FTC 20Hz - 20kHz,     0.1% THD 870W 1150    W 1450    W 2050    W 2450    W 2900W
4    ohms            
    EIA 1kHz,     1%THD 1450    W 1850    W 2400    W 3300    W 4000    W 4800W
Signal    to    Noise,     20Hz-20kHz 98    dB 100    dB 101    dB 102    dB 104    dB 106    dB
  ALL    MODELS
Distortion (Typical)  
  20Hz-20kHz: 10dB    below rated    power Less    than    0.03%    THD,     4    and    8    ohms
1.0kHz and below: full    rated    power Less    than    0.03%    THD,     4    and    8    ohms
Frequency    Response 20    Hz-20    kHz,     ± 1    dB
-3    dB    points:     5    Hz    -    50    kHz
Damping Factor, 1kHz and below Greater    than    300    at    8    ohms
Input    Impedance 10k    ohms    unbalanced,     20k    ohms    balanced
Input    Clipping 10    Vrms    (+22    dB)
Cooling Continuously    variable-speed    fan,     rear-to-front    air    flow
Connectors,     each    channel Input:     Active    balanced;     barrier    strip,     XLR    and    1/4"     (6.3mm)
TRS    tip    and    XLR    (pin    2    positive)
Output:     touch-proof    binding    posts    and    Neutrik®     Speakon®
Controls Front:     AC    switch,     Ch.     1    and    Ch.     2    gain    knobs
Rear:     10-position    DIP    switch
Indicators Power-On:     Green    LED
Signal:     Yellow    LED    (1    per    channel)
Clip:     Red    LED    (1    per    channel)
Amplifier    Protection Stable    into    reactive    or    mismatched    loads
Load    Protection On/off    muting,     AC    coupling    ,     triac    crowbar    ,     on    each    channel)
Power    Requirements 100,     120,     230    VAC,     50-60    Hz
Dimensions 480*480*100(mm)