Expandable Polystyrene FOAMING LINE
What is EPS
Remark: All the parameters listed in the form are standard configuration.
1.aging silo 2.continuous pre-expander 3.batch pre-expander
4.raw material storeroom 5.boiler room 6.air -compressed storage tank
7.steam storage tank 8.air compressor and drier 9.pond and cooling tower
10.automatic vacuum shape molding machine 11.automatic vacuum block molding machines 12.hoppor for machine
13.vacuum tank 14.automatic block cutting machines 15.blocksdrying room
16. shapes drying room
1. Use PLC programmable controller and touch screen to finish the autocycle process of opening-closing mold, feeding, heating, heat preservation, cooling, demolding and releasing.
2. Use auto vacuum control system in the process of feeding, heating, heat preservation and cooling.
3. Vacuum system includes vacuum storage tank, vacuum cooling tank and high efficiency water-cycle vacuum pump.
4. Produce blocks of 6-40kg/m3density, has fast molding, uniform cementing, low moisture content and undeformation.
5. Teflon coating (optional) on the surface of mold is easy to demould.
6. Thickened vacuum bolck molding machine is attched with auto-transportation, auto-electric weighing and printer
What is EPS
Expandable Polystyrene, EPS for short, is manufactured by combining styrene with isobutylene under pressure. When manufacturing EPS products, tiny beads of poly styrene are expanded and consolidated in the process of steam heating and pressure treatment. When heated, the expanding agent enlarges the beads as much as 50 times, after which they are fused by pressure into huge blocks of EPS. These blocks are cured, then cut and shaped to produce a variety of EPS products, bringing lots of benefits to the construction and packing industries.
Features of EPS -- Excellent thermal insulation can reduce energy consumption dramatically.
Lightweight strength enables more products to be transported on less fuel.
Maximum versatility: Cut to panel or moulded, resistant to moisture and compatible with a wide range of materials. Easy to dispose with an integrated system to recycle and reuse.
Pre-expander / EPS Block Molding Machine / EPS Cutting Machine / Auxiliary Equipments
Features of EPS -- Excellent thermal insulation can reduce energy consumption dramatically.
Lightweight strength enables more products to be transported on less fuel.
Maximum versatility: Cut to panel or moulded, resistant to moisture and compatible with a wide range of materials. Easy to dispose with an integrated system to recycle and reuse.
Pre-expander / EPS Block Molding Machine / EPS Cutting Machine / Auxiliary Equipments
| item |
HIM-EPS-3000
|
HIM-EPS-6000
|
HIM-EPS-8000
|
| Capacity (15kg/m3), kg/8 hours |
3500
|
6900
|
9500
|
| Continuous Pre-expander |
PE/C900
|
PE/C900
|
PE/C900
|
| Batch Pre-expander |
PE/B1200
|
PE/B1200
|
PE/B1200
|
| Block Molding Machine |
Air cooling or
vacuum shaping |
Air cooling or
vacuum shaping |
Air cooling or
vacuum shaping |
| Block Cutting Machine |
CM/G3000 (standard) or
customer design |
CM/G3000 (standard) or
customer design |
CM/G3000 (standard) or
customer design |
| Recycling System |
CR1250, DE1250,
MI1250 |
CR1250, DE1250,
MI1250 |
CR1250, DE1250,
MI1250 |
| Silo (3x3x5.5m3), set |
6
|
10
|
12
|
| Steam Boiler, mt/h |
1
|
2
|
2
|
| Power (without auxiliary equipments), kw |
85
|
105
|
120
|
| Workshop Area, m2 |
Height≥6m
|
Height≥6m
|
Height≥6m
|
|
1000
|
1500
|
2500
|
Remark: All the parameters listed in the form are standard configuration.
1.aging silo 2.continuous pre-expander 3.batch pre-expander
4.raw material storeroom 5.boiler room 6.air -compressed storage tank
7.steam storage tank 8.air compressor and drier 9.pond and cooling tower
10.automatic vacuum shape molding machine 11.automatic vacuum block molding machines 12.hoppor for machine
13.vacuum tank 14.automatic block cutting machines 15.blocksdrying room
16. shapes drying room
1. Use PLC programmable controller and touch screen to finish the autocycle process of opening-closing mold, feeding, heating, heat preservation, cooling, demolding and releasing.
2. Use auto vacuum control system in the process of feeding, heating, heat preservation and cooling.
3. Vacuum system includes vacuum storage tank, vacuum cooling tank and high efficiency water-cycle vacuum pump.
4. Produce blocks of 6-40kg/m3density, has fast molding, uniform cementing, low moisture content and undeformation.
5. Teflon coating (optional) on the surface of mold is easy to demould.
6. Thickened vacuum bolck molding machine is attched with auto-transportation, auto-electric weighing and printer