Expanded metal lath/Wall plaster mesh/Diamond Metal Lath For Stucco(Manufacturer)
USE: For exterior stucco work over sheathing and as a plaster base over masonry walls. Self-furring embossed "V" groove holds the lath away from the surface to aid in the keying of stucco to the lath.
SIZE: 27" x 96" (686 mm x 2440 mm)
WEIGHTS:
3.40 lbs/yd2 - (End Painted Red w/ Yellow Stripe)
Installation: Spray Lath - V-Ribbed is intended for applications not requiring a water resistant barrier. The plain kraft paper is applied between V grooves to conserve machine applied stucco and allows visual location of studs during installation.
3.40 lbs/yd2 - (End Painted Red w/ Yellow Stripe)
Installation: Spray Lath - V-Ribbed is intended for applications not requiring a water resistant barrier. The plain kraft paper is applied between V grooves to conserve machine applied stucco and allows visual location of studs during installation.
Material: Hot dipped galvanized metal sheet
Molded: Punched and expanded
Characteristics: Regular diamond hole and high tensile strength
Application: This kind of expanded metal is widely used in plaster project, it provides an excellent plaster base. The permanent pleat holds the plate approximately 1/4" away from solid surfaces to aid the stucco to the pleat. So the plastering is very solid and flat and can also keep away from cracking
Molded: Punched and expanded
Characteristics: Regular diamond hole and high tensile strength
Application: This kind of expanded metal is widely used in plaster project, it provides an excellent plaster base. The permanent pleat holds the plate approximately 1/4" away from solid surfaces to aid the stucco to the pleat. So the plastering is very solid and flat and can also keep away from cracking
size
|
Mesh size
|
thickness
|
Weight/m2
|
2440mm×686mm
|
8mm×18mm
|
0.30mm
|
1.30kg
|
2440mm×686mm
|
8mm×18mm
|
0.35mm
|
1.41kg
|
2440mm×686mm
|
8mm×18mm
|
0.40mm
|
1.61kg
|
2440mm×686mm
|
8mm×18mm
|
0.50mm
|
2.01kg
|