G/S2130 Alloy Bolt Type shackle
• Capacities 1/3 thru 150 metric tons.
• Capacities 1/3 thru 150 metric tons.
• Working Load Limit permanently shown on every shackle.
• Forged — Quenched and Tempered, with alloy pins.
• Hot Dip galvanized or Self Colored.
• Fatigue rated (1/3t - 55t).
• Shackles 25t and larger are RFID EQUIPPED.
• Crosby products meet or exceed all requirements of
ASME B30.26 including identification, ductility, design factor, proof load
and temperature requirements. Importantly, Crosby products meet other
critical performance requirements including fatigue life, impact
properties and material traceability, not addressed by ASME B30.26.
• Shackles 55 metric tons and smaller can be furnished proof tested with
certificates to designated standards, such as ABS, DNV, Lloyds, or other
certification when requested at time of order.
• Shackles 85 metric tons and larger can be provided as follows.
• Non Destructive Tested
• Serialized Pin and Bow
• Material Certification (Chemical) Certification must be
requested at time of order.
• Look for the Red Pin® . . . the mark of genuine Crosby quality.
• Type Approval and certification in accordance with ABS 2006 Steel Vessel
Rules 1-1-17.7, and ABS Guide for Certification of Cranes