AC Powered Plug-In CO/Gas Combination Alarm
Model: CJ-GD502S-M
Model: CJ-GD502S-M
Description
The Alarm is an AC powered plug-in, carbon monoxide and combustible gas alarm that can be installed easily in any standard wall outlet. The unit uses advanced technology to monitor for carbon monoxide and combutible gas levels in your home and features the high precision sensor and world’s most accurate carbon monoxide sensing technology.
This alarm has a clean, low profile design along with three LED’s; green for normal operation, yellow for fault alarm and red for alarm mode. This alarm is easily installed near any of your AC wall outlets. The green LED shows that AC power is present and the alarm is working properly. The red LED will illuminate when
the alarm detects carbon monoxide or combutible gas and indicates that you and your family should move to fresh air. The alarm offers a 5 year limited warranty. The unit AC powered, plug-in CO/Gas alarm protects you and your family from two deadly threats. The continuous digital display shows you the level of carbon monoxide gas (if any) the unit is sensing as well as if gas is
This alarm has a clean, low profile design along with three LED’s; green for normal operation, yellow for fault alarm and red for alarm mode. This alarm is easily installed near any of your AC wall outlets. The green LED shows that AC power is present and the alarm is working properly. The red LED will illuminate when
the alarm detects carbon monoxide or combutible gas and indicates that you and your family should move to fresh air. The alarm offers a 5 year limited warranty. The unit AC powered, plug-in CO/Gas alarm protects you and your family from two deadly threats. The continuous digital display shows you the level of carbon monoxide gas (if any) the unit is sensing as well as if gas is
Present.
Features
- High sensitivity gas sensor - with micro controller unit intelligent firmware makes gas detection more accurate and stable
- Wide AC power Input - AC90~270V
- Dual Gas Sensor -Uses CO/Gas senor together to
- Easy Installation - Mounts near to any wall outlet.
- Easy Mounting Bracket - Allows for fast installation and perfect alignment.
- Loud 85dB - Alerts you of deadly CO gas.
- Self diagnostic function- by MCU intelligent software.
- Quality Design - 5 year limited warranty.
- Test/Reset Button - Tests the alarm electronics and resets the unit during alarm.
- Power LED - Indicates alarm is receiving power and operating properly.
- Alarm/Fault LED - Illuminates when in alarm/fault mode.
- Digital Display – Displays the level of gas the unit is sensing. The unit updates this reading every 15 seconds.
Technical Specifications
- Unit Dimensions: 155mm (H) x 97 mm (W) x 42 mm (D)
- Color: Ceiling White
- Operating Temperature: -10°C to +50°C
- Ambient Humidity:≤95% RH
- Alarm Horn: 85dB at 3m (10 feet)
- Operating Voltage: 220VAC
- Power Consumption: <1.5W (Standby), <5W (Alarm)
- Value of Detection Threshold (Lower Explosive Limit):
Natural Gas: 5000ppm (10% LEL)
LPG:2000PPM (10% LEL)
Coal Gas:800PPM (2% LEL)
LPG:2000PPM (10% LEL)
Coal Gas:800PPM (2% LEL)
- Method of Alarm:Flashing Red LED with 85dB alarm
- Warm Up Time:approximately 60 Seconds