Battery Powered Carbon Monoxide Alarm
Model: CJ-B312CO
Description
The Alarm is an battery powered, carbon monoxide alarm that can be installed easily in any standard wall outlet.
The carbon monoxide alarm uses advanced technology to monitor for carbon monoxide levels in your home and features
the high precision sensor and world’s most accurate carbon monoxide sensing technology. This alarm has a clean, low profile design along with three LED’s;
green for normal operation, yellow for fault alarm and red for alarm mode.
The carbon monoxide alarm uses advanced technology to monitor for carbon monoxide levels in your home and features
the high precision sensor and world’s most accurate carbon monoxide sensing technology. This alarm has a clean, low profile design along with three LED’s;
green for normal operation, yellow for fault alarm and red for alarm mode.
The unit battery powered, CO gas alarm protects you and your family from deadly threats.
The green LED shows that battery power is present and the alarm is working properly. The red LED will illuminate when the alarm detects carbon monoxide and indicates that you and your family should move to fresh air.
The alarm offers a 5 year limited warranty. The continuous digital display shows you the level of carbon monoxide gas (if any) the unit is sensing as well as if gas is present.
The alarm offers a 5 year limited warranty. The continuous digital display shows you the level of carbon monoxide gas (if any) the unit is sensing as well as if gas is present.
Features
- High sensitivity gas sensor - with micro controller unit intelligent firmware makes gas detection more accurate and stable
- Digital Display – Displays the level of gas the unit is sensing. The unit updates this reading every 15 seconds.
- Easy Installation - Mounts near to any wall outlet.
- Easy Mounting Bracket - Allows for fast installation and perfect alignment.
- Loud 85dB - Alerts you of deadly CO gas.
- Self diagnostic function- by MCU intelligent software.
- Quality Design - 5 year limited warranty.
- Test/Reset Button - Tests the alarm electronics and resets the unit during alarm.
- Power LED - Indicates alarm is receiving power and operating properly.
- Alarm/Fault LED - Illuminates when in alarm/fault mode
Technical Specifications
- Power Source: Battery 3XAA Size
- Power Consumption: <1.5W(Standby), <5W(Alarm)
- Sensitivity: 70 ppm CO concentration 60 – 240 minutes
- 150 ppm CO concentration 10 – 50 minutes
- 400 ppm CO concentration 4 – 15 minutes
- Audio Alarm: 85dB at 10ft(3meters)
- DIGITAL LED: Displays CO concentration in PPM
- LED: Green, Normal; Red, Alarm; Yellow, Fault
- Temperature Range: -10°C to 50°C
- Humidity Range: 5%-95% relative humidity (RH)
- Size: 97mm Width x 155mm Height x 42mm Depth
- Weight: 265g