Rubber Conveyor Belt Width: Up to 2400 mm.
Length: Open or endless up to 400 meters in single length provided the diameter does not exceed 10 feet.
Plies: 1 plies to 8 plies.
Type of Fabrics & their features:
Nylon/Nylon (NN) Carcass: NN 100, NN 125, NN 150, NN 200, NN 250, NN 300, NN 350, NN 400 and NN 450.
¤ Lower longitudinal elongation
¤ Higher tensile strength
¤ Good flexibility and trough ability
¤ Good resistance to mildew, moisture and rotting
¤ Good resistance to edge wear
¤ Excellent impact resistance
¤ Unaffected by alkalis and weak acids
¤ Suitable for conveying material over long distances
Polyestor/Nylon (EP) Carcass: 100, EP 125, EP 150, EP 200, EP 250, EP 300, EP 350, EP 400 and EP 450
¤ Besides having the advantages as listed for NN carcass belts, EP belts have the additional advantage of lower longitudinal elongation.
Cotton/ Cotton (CC) Carcass: 28 OZ, 32 OZ, 36 OZ, 42 OZ, 48 OZ and 34 OZ.
¤ Suitable for most applications
¤ Good bonding for rubber
¤ Good fastener holding properties
Cotton/ Nylon (CN) Carcass:
¤ Good troughability
¤ Resistance to longitudinal tearing and damage due to edge turn up
¤ Improved resistance to impact damage
¤ Lighter in weight
¤ Better mechanical fastener holding properties
GRADES:
GRADE M-24: Compounded from premium quality natural rubber to provide excellent resistance to cutting gouging, wear & tear and confirms to the maximum abrasion loss value & minimum tensile strength.
GRADE N-17: Recommended for medium duty services to handle sized materials like woodchips, lime, fine stones, gravel's etc.
GRADE HR(T1): Manufactured with specially formulated rubber compound for handling materials like ash, hot lime, foundry sand etc. having temperature up to 125°C for coarse and 100°C for fines.
GRADE SHR(T2): This cover grade is specially formulated with synthetic & natural rubber to provide superior heat & abrasion resistance. Recommended for temperature up to 180°C for coarse and 160°C for fines material.
GRADE UHR: Specially made with formulation of S.B.R rubber for providing ultra heat & abrasion resistance. Recommended for temperature up to 180°C for coarse and 160°C for fines material.
GRADE FR: This belt is widely used in coal & such type of mines where the ambient temperature may not be high but there is distinct hazard of belts being enveloped in fire.
GRADE OR: specially compounded synthetic rubber cover grade is specially designed to give the best possible resistance to mineral, vegetable and animal oils.
