Gas generator type: 30kw40kw50kw100kw120kw250kw350kw500kw Biogas Generator/biogas genset/bio gas station
;30kw Biogas Generator/biogas genset/bio gas station;30 kw Biogas Generator ; Biogas Generator Set; Biogas Genset/generator
Gas generator type: 30kw Biogas Generator/biogas genset/bio gas station;30 kw Biogas Generator ; Biogas Generator Set; Biogas Genset/generator ;Biogas Generator Set; 30 kw gas Generator; Shengdong Gas Engine power;30 Biogas Genset; 30 Biogas generator
Shengdong 30kw high cost performance biogas generator set/generation/engine
Conditions for Using
1. The temperature of the gas should not surpass 40ºC when the distance between the gas and the pressure regulating valve for air inflow is 1m.
2. The range of the pressure that this biogas generator set can sustain should be 3kPa~10kPa and the fluctuated frequency should not surpass 1kPa/min.
3. The content of the methane in the biogas should not be lower than 45% and its fluctuated frequency should not surpass 2%/min.
4. The content of H2S should not surpass 200mg/Nm3 and the content of NH3 should not surpass 20mg/Nm3.
5. The granularity of the impurity should not surpass 5μ M and the content of the impurity should not surpass 30mg/Nm3.
6. The content of water in biogas used in this biogas generator set should not surpass 40g/Nm3.
7. For biogas with methane of about 30%~45%, low density biogas generator should be used.
For those gases which cannot reach the conditions above, this biogas generator set should be specially allocated after evaluation according to the specified composition, pressure, temperature, etc. Provided.
Technical Specifications
Model 30GF-PZ
Model of generator Z6105
Rated power(kW) 30
Rated rotated speed (r/min) 1500
Rated voltage(V) 400
Rated current(A) 54
Rated frequency(Hz) 50
Power factor(cosφ ) 0.8
Power supply mode Three coils wired by 3 phase line and 1 zero line wire in Y-connection way.
Excitation way Brushless excitation
Way for adjusting pressure Automatic adjusting pressure
Starting up method 24VDC Electric starting system
Way for cooling Closed water cooling
Way for adjusting speed Electronic governor for adjusting speed
Dimension(LxWxH) (mm) 2295 x860x1540
Net weight (kg) 1150
Technical Parameters
Name of Parameter Value of Parameter
Model Z6105
Number of cylinder 6
Arranging way of cylinders Straightly arranged
Diameter of cylinder(mm) 105
Route(mm) 125
Total displacement(L) 6.49
Air inflow way Naturally aspirated
Rated power(kW) 35
Rated rotate speed(r/min) 1500
Net weight(kg) 530