Product Main

Specifications

about biomass energy 100kw 200kw 300kw 400kw 

biomass to energy 

Biomass generators type : 80kw 100kw 200kw  Biomass Generators/gensets;200kw-300kw  Biomass Generator/genset;20KW-500kw-1000KW BIOMASS GENSETS;40kw 50kw biomass generators/gensets;biomass gasifying power generators;biomass gasifying power generators;
Biogas Generators type: 1000KW gas generator set; 1000KW BIOMASS GENERATOR; 1000KW gas generators; Gobar gas plant; 1000KW natural gas generator; 1000KW gas engines
 
Shengdong is one of Chinese leading manufacturers of gas-fueled inner combustion engine, packed generator sets and cogeneration units for power generation. It is one of the only companies in China focusing exclusively on gas engine technology

SHENGDONG GROUP ---biomass generator
Model Type SDNEG --120GF-153T
Output Power (KW) 120
Voltage V 400
Engine type T4190ZL-3
Alternator model SB-W-120-WC34
Rated Current 217
Inlet pressure 100KPA-300KPA
Working pressure 0.756 MPA
Aspiration Natural Aspirated
Arrangement of cylinder V-12,
4-stroke-cycle
Bore/Stroke 190/210
Connection model 3 Phase 4 wire
Voltage regulate range ± 5%
Noise 112 dB(A)
Engine speed (rpm) 1000
Fuel consumption MJ/kwh 12
Exhaust temp Celsius ≤ 550
Ignition mode Spark-Ignited
Starting mode 24V DC Power
Insulation G2
Excitement Brushless excited
Dimension:
L x W x H (mm) 4010*1600*2030
Weight (kg) 6100
Conditions for Using
1. Temperature of the straw gas used in this biomass generator set should not surpass 40 Celsius when it is 1m or nearer to the pressure regulating valve for air inflow.
 2. The pressure that this biomass generator set can sustain ranges from 3kPa to 10 kPa and the fluctuated frequency of the pressure should not surpass 1kPa/min.
 3. The granularity of the impurity should not surpass 5 μ M and its max. Content is 30mg/Nm3.
 
4. For the straw gas used in this biomass generator set, the volume content of H2 should not surpass 20% and the max. Content of H2S, NH3 and tar are 50mg/Nm3, 20mg/Nm3, and 50mg/Nm3.
 5. The moisture content in straw gas should not surpass 40g/Nm3 and the heating value of the straw gas should not lower than 4MJ/Nm3.
 For gas that cannot reach the conditions above, special allocation will be took for this biomass generator set after evaluation according to the specific composition, pressure, temperature, etc. Provided.