Principle:
The marking-needle is controlled by computer, move on traces as pre-edited characters and graphs, to strike materials at a high frequency under the application of compressed air, finally to form the needed characters and graphs on work-piece.
The marking-needle is controlled by computer, move on traces as pre-edited characters and graphs, to strike materials at a high frequency under the application of compressed air, finally to form the needed characters and graphs on work-piece.
Main Features:
The machine can be adsorbed to mark on the objects which are in bulk mass and different to move, such as car body, chassis, crossbar, pipe fitting and flange. As the machine is in small dimension and light weight, and can work in a long distance from the controller just connected by a long cable wire.
Software with strong editing function support Windows operating system, easy to use, capable to mark Chinese and English characters, Arabic numbers and graphs, automatic marking serial numbers, international standard VIN codes and scales.
The machine can be adsorbed to mark on the objects which are in bulk mass and different to move, such as car body, chassis, crossbar, pipe fitting and flange. As the machine is in small dimension and light weight, and can work in a long distance from the controller just connected by a long cable wire.
Software with strong editing function support Windows operating system, easy to use, capable to mark Chinese and English characters, Arabic numbers and graphs, automatic marking serial numbers, international standard VIN codes and scales.
Applications:
Large-scale machine, power equipment, engine, diesel engine, mechanical, oil and boiler, pipe fittings, valve, other spare parts and the work-piece in bulk mass and difficult to move.
Large-scale machine, power equipment, engine, diesel engine, mechanical, oil and boiler, pipe fittings, valve, other spare parts and the work-piece in bulk mass and difficult to move.
Main tech-specification(Non-standard products can be customized):
Marking Range 150*50mm (on plane or the curved surface that radian is less than 3mm)
Marking Speed ≤ 50mm/s(3 or 4 characters, adjustable)
Marking Depth 0.1~1mm adjustable
Repeat Precision ± 0.01mm
Pneumatic pressure 0.3~0.7Mpa Weight 10KG
Power consumption 100W(not including air compressor and computer)
Size 350mm× 170mm× 300mm
Hardness of work-piece HRC≤ 60
Voltage 220V± 10% 50Hz
Marking Range 150*50mm (on plane or the curved surface that radian is less than 3mm)
Marking Speed ≤ 50mm/s(3 or 4 characters, adjustable)
Marking Depth 0.1~1mm adjustable
Repeat Precision ± 0.01mm
Pneumatic pressure 0.3~0.7Mpa Weight 10KG
Power consumption 100W(not including air compressor and computer)
Size 350mm× 170mm× 300mm
Hardness of work-piece HRC≤ 60
Voltage 220V± 10% 50Hz