Automatic industrial NDT film processor
Full automatic NDT x-ray film processor SX430B is use for developing industry-use x-ray films. It can develop NDT roll films.
main technical specifications and parameters are:
1.Film processor normal working condition:
⑴surrounding temperature:10℃~30℃
⑵relative humidity:≤80%
⑶install in darkroom with in ＆out water way and no dust and ventilate equipment.
2.Film Specifications:
(1)standard film: single piece(76×125～357×infinity)(mm)
(3〞×5〞～14〞×infinity)
(2)special sized film: Maximum width B max=357mm
Minimum length L min=125mm
(3)film variety: high-temperature film
3.Developing Parameter:
⑴time for whole process: NDT 6 min ～limit, adjustable
NDT films best developing time 8 min
⑵developing medical liquid temperature:24℃～35℃, adjustable
3.Solution Capability: developer tank 10 liters
fixer tank 10 liters
4.Water Consumption: about 5 liters/min
5.Power Supply: AC220V , 50/60HZ
6.Input Power: ≤ 4KW
7.Outlook Size: Length × Width × Height, 1150 mm×600 mm×1170mm
10.Net Weight: 120Kgs
Product Characteristic:
Equipment Figure: New designed body and beautiful outlook. Taking films very expediently due films turn above.
Extra-Deep Tank Rolling Frame: Deep than wide is 3: 1, this design make films very distinct clear.
Special Film-Sending Principle: Sending films by special crossing way and no touch guide systems design, no risk of films jamming or scratch.
Anti-oxidization Performance: Sealed chemicals circulation systems reduce touch area for chemicals and air.
Critical Parts: The rollers' material can resist high-temperate and crystallization. No change shape and swell for using long time.
Circuit Control: Microprocessor controls heating, automatic check and touch films, replenishing chemicals.
Energy-Saving: Keep sleep situation when no films need process after a while. Stop heating and rolling, then cut enter water. This can save energy for max limit.
Full automatic NDT x-ray film processor SX430B is use for developing industry-use x-ray films. It can develop NDT roll films.
main technical specifications and parameters are:
1.Film processor normal working condition:
⑴surrounding temperature:10℃~30℃
⑵relative humidity:≤80%
⑶install in darkroom with in ＆out water way and no dust and ventilate equipment.
2.Film Specifications:
(1)standard film: single piece(76×125～357×infinity)(mm)
(3〞×5〞～14〞×infinity)
(2)special sized film: Maximum width B max=357mm
Minimum length L min=125mm
(3)film variety: high-temperature film
3.Developing Parameter:
⑴time for whole process: NDT 6 min ～limit, adjustable
NDT films best developing time 8 min
⑵developing medical liquid temperature:24℃～35℃, adjustable
3.Solution Capability: developer tank 10 liters
fixer tank 10 liters
4.Water Consumption: about 5 liters/min
5.Power Supply: AC220V , 50/60HZ
6.Input Power: ≤ 4KW
7.Outlook Size: Length × Width × Height, 1150 mm×600 mm×1170mm
10.Net Weight: 120Kgs
Product Characteristic:
Equipment Figure: New designed body and beautiful outlook. Taking films very expediently due films turn above.
Extra-Deep Tank Rolling Frame: Deep than wide is 3: 1, this design make films very distinct clear.
Special Film-Sending Principle: Sending films by special crossing way and no touch guide systems design, no risk of films jamming or scratch.
Anti-oxidization Performance: Sealed chemicals circulation systems reduce touch area for chemicals and air.
Critical Parts: The rollers' material can resist high-temperate and crystallization. No change shape and swell for using long time.
Circuit Control: Microprocessor controls heating, automatic check and touch films, replenishing chemicals.
Energy-Saving: Keep sleep situation when no films need process after a while. Stop heating and rolling, then cut enter water. This can save energy for max limit.