Electronic Lock-Electronic Magnetic Lock /Magnetic Door Lock for Automatic Door
Function

Locking function specifically designed for automatic door access control device; dedicated fixed support for automatic door guide rail bracket provideed together

The electromagent may be used for ground installation and wall installation, for getting standard electromagent suction, deflection angle of suction plate may be 45 degrees for meeting the requirement of rapid plane calibration of suction plate and electronic magnet

The electromagent is also equipped with an emergency stop button; without remanence after interruption, it is rather safe and reliable.

Suction: 60KG

Operating voltage: 120VDC+-10% or 24DC+-10%

WORKING CURRENT: 12VDC/0.18A 24DC/0.09A

Specification

Close with power on, open with power off. Remote the remains automatically, low noise, and against the wind pressure

Special device: inner-placed wave receptor. Detect: door detected signal output (selected)

Security type: the application scope of the switch: wooden door, glass door, metal door, fireproof door

Close with power on, open with power off. Remove the remains automatically, low noise, and against the wind pressure

Size: length 250*width42*height25mm

Input voltage: 12v or 24v

Affordable tension: 280kg

The specifications of all the products should take the actual products as standards. Due to the update of the technology, we cannot promise all the actual products are the same as shown in the material. For detail technical parameters, pls read the instructions enclosed with the products.