Pneumatic Fiber Polishing Machine
The pneumatic fiber polishing machine can process each kind of standard fiber optic connector: FC, LC, SC, ST, MT-RJ, MPO, E2000, SMA905, FA etc. This fiber polishing machine is pneumatic fiber polishing machine, let the speed and pressure is uniform, polishing effect is better, percent of pass is very highest. The pneumatic fiber polishing machine has itself fiber polishing fixture, it more special.
The pneumatic fiber polishing machine use the alloy gear drive, the polishing fixture diameter reaches 127mm, the performance is stable
The compression, the pneumatic fiber polishing machine unloading and the replacement of jig and polishing film is convenient and quick
Our this pneumatic fiber polishing machine is processing quality is stable, percentage of products sent back for repair is low
The pneumatic fiber polishing machine's production efficiency is high (may several machines compose production lines)
The pneumatic fiber polishing machine using the consumable material can be saved, cost is low
The pneumatic fiber polishing machine's speed is controllable, can be adjusted as necessary (0~200rpm)
This pneumatic fiber polishing machine can grind other similar products
The outward appearance design is more succinct and natural
The pneumatic fiber polishing machine can process each kind of standard fiber optic connector: FC, LC, SC, ST, MT-RJ, MPO, E2000, SMA905, FA etc. This fiber polishing machine is pneumatic fiber polishing machine, let the speed and pressure is uniform, polishing effect is better, percent of pass is very highest. The pneumatic fiber polishing machine has itself fiber polishing fixture, it more special.
The pneumatic fiber polishing machine use the alloy gear drive, the polishing fixture diameter reaches 127mm, the performance is stable
The compression, the pneumatic fiber polishing machine unloading and the replacement of jig and polishing film is convenient and quick
Our this pneumatic fiber polishing machine is processing quality is stable, percentage of products sent back for repair is low
The pneumatic fiber polishing machine's production efficiency is high (may several machines compose production lines)
The pneumatic fiber polishing machine using the consumable material can be saved, cost is low
The pneumatic fiber polishing machine's speed is controllable, can be adjusted as necessary (0~200rpm)
This pneumatic fiber polishing machine can grind other similar products
The outward appearance design is more succinct and natural
| Pressure way | by one hammer | Insert Loss | 0.3 dB (SM) |
| 0.2 dB (MM) | |||
| polishing capacity(max) | SC, FC, ST: 12units LC: 16units | Return Loss | 50 dB (PC) |
| 60 dB (APC) | |||
| polishing connector type | FC, SC, ST, LC, MU, MTP, MPO, MTRJ and so on | Radius | 10~25mm |
| motor speeed | 170rpm rotation, 2rpm revolution | Offset | 50 μ M |
| dimension | 200*400*500mm | Under cut | 50nm |
| film size | 4' ' | Repeatability | 0.1dB |
| weight | 20KG | Interchangeability | 0.2 dB |
| Input voltage | 100-120VAC, 50/60Hz or 220-240VAC, 50/60Hz |
| polishing cycle | 2.5mins |
| Polishing chassis diameter | 112mm |
| External diameter of bottom plate | 126mm |
| Inside diameter of bottom plate | 112mm |
| Polishing chassis beating | ≤ 5um |
| Polishing time setting | 0~999.99s |
| Counterweight pressure | 2.1~3.6kgf/cm |
| Heavy punch | 500g or 250g |
| Stress arm | 4 phase shifter |