SZ-1200 Precise soldering machine /seam welder / crack cold welding equipment
Brief function:
- Repair cracks as this machine with good compact and permeability
- Soldering thin stainless steel plate, table-board, tube together.
Main function setup:
- Precise pulse welder (high imitate laser welder): input heat for welding is very small, precision welding. Each tiny defect part can be welded precise and easily
- Consecutive pulse welder
Characters of SZ-1200 for welding
1. Small heat affected zone while welding
2. No need preheating processing, no need annealing for the work pieces after welding
3. No deformation and edge after welding.
4. No air hole and sand holes after welding.
5. Precise and accurate: can weld very small and precise part, the finest wires used for welding can be 0.10mm-0.20mm
6. It is convenient and flexible for welding, site repair is also available.
7. Widely used in repair all cracks, sand holes, collapse edges, corners, abrasion, etc.
8. It is also available welding the toughing mouth of cold dies and tools. Thus exempt from the preheating, heat preservation process of ordinary arc welder.
Application Range
- Injection mold, stamping mold, casting mould, rubber mould, copper and aluminum alloy mold, etc. After repairing / welding, all mould can be used for all kinds of mechanical processing, thermal treatment and nitrogen treatment.
- Repair work pieces, parts, tools: like all kinds of gears, rodents, machine tools.
- Soldering thin stainless steel plate, such as stainless steel table-board, tube together.
Technical Parameters
Mode
|
SZ-1200
|
Input power
|
Single phase.AC.220V
|
Power consumption
|
1200W
|
Instantaneous maximum power
|
>40KV
|
Output power
|
0.05-40KW
|
Output Currency
|
2-500A
|
Pulse frequency range
|
1-5HZ
|
Cooling way
|
Fan automatic air cooling
|
Applicable tungsten polar diameter
|
1.0-2.0mm
|
Net weight
|
15KG
|
Dimension (L*W*H)
|
400*220*290mm
|